Datasheet Texas Instruments LF347M/NOPB
| Manufacturer | Texas Instruments |
| Series | LF347-N |
| Part Number | LF347M/NOPB |
Wide Bandwidth Quad JFET Input Operational Amplifiers 14-SOIC 0 to 70
Datasheets
LF147/LF347 Wide Bandwidth Quad JFET Input Operational Amplifiers datasheet
PDF, 1.7 Mb, Revision: D, File published: Mar 25, 2013
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 14 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 55 |
| Carrier | TUBE |
| Device Marking | LF347M |
| Width (mm) | 3.91 |
| Length (mm) | 8.65 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Download |
Parametrics
| Additional Features | N/A |
| Architecture | FET |
| CMRR(Min) | 70 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 4 MHz |
| Input Bias Current(Max) | 200 pA |
| Iq per channel(Max) | 2.75 mA |
| Iq per channel(Typ) | 1.8 mA |
| Number of Channels | 4 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 31 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 14SOIC: 52 mm2: 6 x 8.65(SOIC) PKG |
| Rail-to-Rail | In to V+ |
| Rating | Catalog |
| Slew Rate(Typ) | 13 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 20 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Eco Plan
| RoHS | Compliant |
Application Notes
- AN-447 Protection Schemes for BI-FET Amplifiers and SwitchesPDF, 80 Kb, File published: May 2, 2004
Application Note 447 Protection Schemes for BI-FET Amplifiers and Switches - AN-301 Signal Conditioning for Sophisticated Transducers (Rev. B)PDF, 1.2 Mb, Revision: B, File published: May 6, 2013
This application note discusses signal conditioning and applications information for a diverse group ofsophisticated and unusual transducers. - AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)PDF, 262 Kb, Revision: B, File published: May 6, 2013
Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor - AN-263 Sine Wave Generation Techniques (Rev. C)PDF, 747 Kb, Revision: C, File published: Apr 22, 2013
This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels. - AN-262 Applying Dual and Quad FET Op Amps (Rev. B)PDF, 1.1 Mb, Revision: B, File published: May 6, 2013
The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab - Get More Power Out of Dual or Quad Op-AmpsPDF, 91 Kb, File published: Oct 2, 2002
Model Line
Series: LF347-N (6)
- LF347BN/NOPB LF347M LF347M/NOPB LF347MX LF347MX/NOPB LF347N/NOPB
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps
