Datasheet Texas Instruments TPS54680PWPG4

Manufacturer	Texas Instruments
Series	TPS54680
Part Number	TPS54680PWPG4

Datasheets

Prices

Status

Packaging

Eco Plan

Design Kits & Evaluation Modules

• Evaluation Modules & Boards: TPS54680EVM
  6-A DC/DC Converter with Simultaneous Sequencing of Multiple Voltages
  Lifecycle Status: Active (Recommended for new designs)
  
  • Download
• Evaluation Modules & Boards: XILINXPWR-082
  XILINXPWR-082 Power Management Evaluation Module for Xilinx FPGAs
  Lifecycle Status: Active (Recommended for new designs)
  
  • Download

Application Notes

• Download
  Using TPS54x80 Tracking SWIFT(TM) dc/dc Converters f/Simult. Tkg of Input Supply
  PDF, 115 Kb, File published: Feb 10, 2005
  High-performance signal processing devices, such as FPGAs and DSPs, require multiple power supply voltages for operation. The order and timing in which these supply outputs power up and down is usually specified. A design example using the TPS54380 is shown for the case where the power supply to be tracked is also the input voltage to the TPS54380. Information is provided for adjusting the start-u
• Download
  Designing for Small-Size, High-Freq Applications Using TPS546xx DC/DC Converters
  PDF, 646 Kb, File published: Oct 19, 2001
  This application report describes the design procedure for a small-size, high frequency application using SWIFTВ™ synchronous buck regulators. It shows that the compensation circuitry of the regulators, with the minimum size output filter and fast transient response, provides the 150-kHz unity gain bandwidth of the open feedback loop. The design is illustrated by the 6-A, DDR memory VTT track
• Download
  Sequencing with TPS54x80 and TPS54x73 DC/DC Converters
  PDF, 169 Kb, File published: Apr 14, 2003
  Design of a power supply for a high-performance point-of-load processor requires special attention to manage core and input/output (I/O) voltage sequencing, which is critical to device operation and long term reliability. The TPS54x80 devices of low input voltage synchronous-buck dc/dc converters are designed for easily implementing sequential, ratio-metric, or simultaneous sequencing schemes. F
• Download
  Simultaneous power-down sequencing with the TPS74x01 family of linear regulators
  PDF, 312 Kb, File published: Aug 10, 2007
• Download
  Optimizing the Layout of the TPS546xx for Thermal Performance (Rev. A)
  PDF, 240 Kb, Revision: A, File published: Feb 8, 2002
  This application report examines the thermal performance of different layout techniques for the TPS5461x family of 6-amp synchronous buck regulators. The TPS5461x family consists of the TPS54610, TPS54611, TPS54612, TPS54613, TPS54615, and the TPS54616. The TPS54610 has an adjustable output voltage, while the output voltages of the other devices in this family are fixed. This application note is a
• Download
  Q3 2007 Issue Analog Applications Journal
  PDF, 617 Kb, File published: Aug 10, 2007
• Download
  Thermal Performance of SWIFT(TM) DC/DC Converters in the 28-Pin HTSSOP Package
  PDF, 267 Kb, File published: Feb 4, 2005
  The thermal management of printed-circuit boards is complex, but must be well understood to achieve optimum performance and reliability. SWIFT(TM) dc/dc converters in the 28-pin HTSSOP package rely on an exposed lead frame die pad [PowerPAD(TM)] on the bottom of the package to provide an extremely low thermal resistance from junction to case. The thermal performance of the 6-, 9-, and 14-A SWIFT d
• Download
  Using Low Voltage SWIFT DC/DC Converters with Ceramic Capacitors
  PDF, 490 Kb, File published: Jan 8, 2003
  This application note investigates an adequate phase margin for stable operation of SWIFTв„ў regulators with the ceramic capacitors at worst-case tolerances of regulator and external parts. TI also shows how the bandwidth and gain of feedback loop impact on load-current transient-response characteristics. Measurements and analysis have shown that the voltage-mode control SWIFTв„ў regulat

Model Line

Manufacturer's Classification

• Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)