Datasheet Texas Instruments OPA2695IRGTTG4
| Manufacturer | Texas Instruments |
| Series | OPA2695 |
| Part Number | OPA2695IRGTTG4 |
Ultra-Wideband, Current-Feedback Operational Amplifier with Disable 16-VQFN -40 to 85
Datasheets
Dual, Ultra-Wideband, Current-Feedback Operational Amplifier with Disable datasheet
PDF, 1.4 Mb, Revision: A, File published: Aug 29, 2008
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 16 |
| Package Type | RGT |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | 2695 |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 73 dBc |
| 3rd Harmonic | 82 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Bipolar,Current FB |
| BW @ Acl | 1100 MHz |
| CMRR(Min) | 51 dB |
| CMRR(Typ) | 56 dB |
| GBW(Typ) | 1100 MHz |
| Input Bias Current(Max) | 30000000 pA |
| Iq per channel(Max) | 13.3 mA |
| Iq per channel(Typ) | 12.9 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 15 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 120 mA |
| Package Group | VQFN |
| Package Size: mm2:W x L | 16VQFN: 9 mm2: 3 x 3(VQFN) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 2900 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3.5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 1.8 nV/rtHz |
| Vn at Flatband(Typ) | 1.8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 3.5 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: DEM-OPA-SO-2E
DEM-OPA-SO-2E
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Wireline Data Transmission and ReceptionPDF, 191 Kb, File published: Jan 27, 2010
Many types of wires are widely used to transmit data. Specifically, Category 3 and Category 5 (Cat3 and Cat5e, respectively)—also known as unshielded twisted pair or UTP lines—are now recommended for new telephone installations. Coaxial (coax) cables are used to distribute cable television (CATV) signals throughout a home. #12 and #14 American wire gauge (AWG) electric power distribution wire is a - Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)PDF, 327 Kb, Revision: A, File published: Sep 10, 2010
This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir - Tuning in AmplifiersPDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Model Line
Series: OPA2695 (7)
- OPA2695ID OPA2695IDG4 OPA2695IDR OPA2695IRGTR OPA2695IRGTRG4 OPA2695IRGTT OPA2695IRGTTG4
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
