Datasheet Texas Instruments ADC12D1600CIUT

Manufacturer	Texas Instruments
Series	ADC12D1600
Part Number	ADC12D1600CIUT

12-Bit, Dual 1.6-GSPS or Single 3.2-GSPS Analog-to-Digital Converter (ADC) 292-BGA -40 to 85

Datasheets

Download

PDF, 3.6 Mb, Revision: N, File published: Aug 31, 2015

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	292
Package Type	NXA
Industry STD Term	BGA
JEDEC Code	S-PBGA-N
Package QTY	40
Carrier	JEDEC TRAY (10+1)
Device Marking	ADC12D1600CIUT
Width (mm)	27
Length (mm)	27
Thickness (mm)	2.38
Pitch (mm)	1.27
Max Height (mm)	2.4
Mechanical Data	Download

Parametrics

# Input Channels	2,1
Analog Input BW	2800 MHz
Architecture	Folding Interpolating
DNL(Max)	0.4 +/-LSB
DNL(Typ)	0.4 +/-LSB
ENOB	9.4 Bits
INL(Max)	2.5 +/-LSB
INL(Typ)	2.5 +/-LSB
Input Buffer	Yes
Input Range	0.8 Vp-p
Interface	Parallel LVDS
Operating Temperature Range	-40 to 85 C
Package Group	BGA
Package Size: mm2:W x L	292BGA: 729 mm2: 27 x 27(BGA) PKG
Power Consumption(Typ)	3880 mW
Rating	Catalog
Reference Mode	Int
Resolution	12 Bits
SFDR	70.3 dB
SINAD	58.2 dB
SNR	58.5 dB
Sample Rate(Max)	1600,3200 MSPS

Eco Plan

RoHS	See ti.com

Design Kits & Evaluation Modules

Evaluation Modules & Boards: ADC-WB-BB
ADC Wide Band Balun Board
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: ADC12D1600RB
12-Bit, Dual 1.6/1.8 GSPS or Single 3.2/3.6 GSPS A/D Converter Reference Board
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: ADC-LD-BB
ADC Low Distortion Balun Board
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: TC1-DESIQ-SBB
TC1 DESIQ Single Balun Board
Lifecycle Status: Active (Recommended for new designs)
- Download

Application Notes

Download
AN-2128 ADC1xD1x00 Pin Compatibility (Rev. C)
PDF, 60 Kb, Revision: C, File published: May 1, 2013
In order to facilitate upgrading applications from a 10-bit Gig ADC to a 12-bit Gig ADC, the ADC10D1x00(ADC10D1500/ADC10D1000) is designed to be pin-compatible with the ADC12D1x00(ADC12D1800/1600/1000). This means that a single board layout may be designed with both resolutionADCs in mind for more cost efficient and time-to-market product development.
Download
AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)
PDF, 1.7 Mb, Revision: A, File published: Apr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver.
Download
From Sample Instant to Data Output: Understanding Latency in the GSPS ADC
PDF, 392 Kb, File published: Dec 18, 2012
For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products,
Download
AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)
PDF, 169 Kb, Revision: G, File published: Feb 3, 2017
Download
Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of Mitigat
PDF, 720 Kb, File published: Dec 9, 2013
The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12

Model Line

Series: ADC12D1600 (2)

ADC12D1600CIUT ADC12D1600CIUT/NOPB

Manufacturer's Classification

Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)