Datasheet Texas Instruments ADS8364Y/250
| Manufacturer | Texas Instruments |
| Series | ADS8364 |
| Part Number | ADS8364Y/250 |
6-Channel Simultaneous Sampling SAR ADC, 16-bits with 250kSPS for Motor and Power Control 64-TQFP -40 to 85
Datasheets
250kSPS, 16-Bit, 6-Channel Simultaneous Sampling A/D Converters datasheet
PDF, 953 Kb, Revision: C, File published: Aug 22, 2006
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 64 |
| Package Type | PAG |
| Industry STD Term | TQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | ADS8364Y |
| Width (mm) | 10 |
| Length (mm) | 10 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| # Input Channels | 6 |
| Analog Voltage AVDD(Max) | 5.25 V |
| Analog Voltage AVDD(Min) | 4.75 V |
| Architecture | SAR |
| Digital Supply(Max) | 5.5 V |
| Digital Supply(Min) | 2.7 V |
| INL(Max) | 8 +/-LSB |
| Input Range(Max) | 2.6 V |
| Input Range(Min) | -2.6 V |
| Input Type | Pseudo-Differential |
| Integrated Features | N/A |
| Interface | Parallel |
| Multi-Channel Configuration | Simultaneous Sampling |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TQFP |
| Package Size: mm2:W x L | 64TQFP: 144 mm2: 12 x 12(TQFP) PKG |
| Power Consumption(Typ) | 413.1 mW |
| Rating | Catalog |
| Reference Mode | Ext,Int |
| Resolution | 16 Bits |
| SINAD | 82.5 dB |
| SNR | 83.2 dB |
| Sample Rate (max) | 250kSPS SPS |
| Sample Rate(Max) | 0.25 MSPS |
| THD(Typ) | -92 dB |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: ADS8364M-EVM
ADS8364M Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Interfacing the ADS8364 ADC to the MSP430F149PDF, 91 Kb, File published: Jul 23, 2002
The ADS8364 16-bit parallel output analog-to-digital converter has a number of features that allow for an easy interface to the MSP430x1xx family of microcontrollers. Using ports 1 and 2 of the Texas Instruments MSP430F149, this application note focuses on configuring, sampling and converting analog data presented to the ADS8364 ADC. Port 1 is used for control, while port 2 accepts byte mode dat - Interfacing the ADS8364 to the TMS320F2812 DSPPDF, 78 Kb, File published: Dec 11, 2002
The ADS8364 16-bit parallel output analog-to-digital converter has a number of features that allow for an easy interface to the TMS320F2812в„ў digital signal processor. This application note focuses on configuring, sampling, and converting analog data presented to the ADS8364 ADC. Portions of ports A, E, and F are used for general-purpose control, while the parallel data bus accepts data fro - Data Converters for Industrial Power Measurements (Rev. B)PDF, 513 Kb, Revision: B, File published: Dec 9, 2005
Sources of noise generation are pervasive in contemporary industrial applications. Unwanted noise presents one of the major problems in measuring power or protecting circuits in such an environment. Knowing the characteristics and understanding the behavior of noise sources are valuable to designers and users of electronic circuits. The first part of this report defines some fundamental concepts o - Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)PDF, 227 Kb, Revision: A, File published: Nov 10, 2010
This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different - Software Control of the ADS8364PDF, 92 Kb, File published: Aug 22, 2002
The ADS8364 16-bit parallel output analog-to-digital converter has a number of features that allow for an easy interface to a variety of digital signal processors (DSP) from Texas Instruments. This application note focuses on configuring, sampling and converting analog data presented to the ADS8364 ADC using software control with the TMS320C6711? DSP starter kit. In this application, McBSPa is u - Determining Minimum Acquisition Times for SAR ADCs, part 2PDF, 215 Kb, File published: Mar 17, 2011
The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to
Model Line
Series: ADS8364 (4)
- ADS8364Y/250 ADS8364Y/250G4 ADS8364Y/2K ADS8364Y/2KG4
Manufacturer's Classification
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)
