Datasheet Texas Instruments THS6012CDWP
| Manufacturer | Texas Instruments |
| Series | THS6012 |
| Part Number | THS6012CDWP |
500-mA Dual Differential Line Driver 20-SO PowerPAD 0 to 70
Datasheets
500 mA Dual Differential Line Driver datasheet
PDF, 1.1 Mb, Revision: F, File published: Jun 28, 2012
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 20 |
| Package Type | DWP |
| Industry STD Term | HSOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 25 |
| Carrier | TUBE |
| Device Marking | THS6012C |
| Width (mm) | 7.52 |
| Length (mm) | 12.82 |
| Thickness (mm) | 2.55 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 2.65 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 80 dBc |
| 3rd Harmonic | 85 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Current FB |
| BW @ Acl | 140 MHz |
| CMRR(Min) | 62 dB |
| CMRR(Typ) | 70 dB |
| GBW(Typ) | 140 MHz |
| Input Bias Current(Max) | 10000000 pA |
| Iq per channel(Max) | 13 mA |
| Iq per channel(Typ) | 11.5 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 20 uV/C |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 500 mA |
| Package Group | SO PowerPAD |
| Package Size: mm2:W x L | 20SO PowerPAD: 133 mm2: 10.405 x 12.825(SO PowerPAD) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 1300 V/us |
| Total Supply Voltage(Max) | 33 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 9 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 1.8 nV/rtHz |
| Vn at Flatband(Typ) | 1.7 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: THS6012EVM
THS6012 High Speed Amplifier Evaluation Modules
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Active Output Impedance for ADSL Line DriversPDF, 636 Kb, File published: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: THS6012 (6)
- THS6012CDWP THS6012CDWPG4 THS6012CDWPR THS6012IDWP THS6012IDWPR THS6012IGQER
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
