Datasheet Texas Instruments TLV2770IP

Single 2.7-V High-Slew-Rate Rail-to-Rail Output Operational Amplifier w/Shutdown 8-PDIP -40 to 125

Datasheets

PDF, 2.5 Mb, Revision: G, File published: Feb 23, 2004

Extract from the document

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Additional Features	Shutdown
Architecture	CMOS
CMRR(Min)	60 dB
CMRR(Typ)	96 dB
GBW(Typ)	5.1 MHz
Input Bias Current(Max)	60 pA
Iq per channel(Max)	2 mA
Iq per channel(Typ)	1 mA
Number of Channels	1
Offset Drift(Typ)	2 uV/C
Operating Temperature Range	-40 to 125,0 to 70 C
Output Current(Typ)	40 mA
Package Group	PDIP
Package Size: mm2:W x L	See datasheet (PDIP) PKG
Rail-to-Rail	In to V-,Out
Rating	Catalog
Slew Rate(Typ)	10.5 V/us
Total Supply Voltage(Max)	5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)	2.5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	17 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	2.5 mV

RoHS	Compliant
Pb Free	Yes

Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- Download

Download
TLV277x/TLV277xA EMI Immunity Performance
PDF, 284 Kb, File published: Dec 20, 2012
Download
Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)
PDF, 197 Kb, Revision: A, File published: Mar 12, 2001
This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation.
Download
Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
PDF, 61 Kb, File published: Mar 23, 2000
The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
Download
Use of Rail-to-Rail Operational Amplifiers (Rev. A)
PDF, 159 Kb, Revision: A, File published: Dec 22, 1999
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Series: TLV2770 (6)

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps