Datasheet Texas Instruments LM317LCD

Manufacturer	Texas Instruments
Series	LM317L
Part Number	LM317LCD

Datasheets

Prices

Status

Packaging

Parametrics

Eco Plan

Application Notes

• Download
  High Stability Regulators
  PDF, 104 Kb, File published: Oct 3, 2002
• Download
  AN-178 Applications for an Adjustable IC Power Regulator (Rev. B)
  PDF, 219 Kb, Revision: B, File published: May 5, 2013
  This application report provides applications for the Texas Instruments LM117 3-terminal adjustableregulator.
• Download
  AN-42 IC Provides On-Card Regulation for Logic Circuits (Rev. B)
  PDF, 593 Kb, Revision: B, File published: May 6, 2013
  This application report provides on-card regulation for logic circuits.
• Download
  High-Efficiency Reg has Low Drop-Out Voltage (Rev. B)
  PDF, 60 Kb, Revision: B, File published: Apr 23, 2013
  Conventional regulators have a high drop-out voltage that is a function of the total output current.However with just a regulator chip an external transistor and a few passive components this designforms a high output current regulator with a limited input voltage and high efficiency. The circuit presentedhas a drop-out of 0.7V at 5A load current and 1.3V at a current level of as high as
• Download
  Adjustable 3-Terminal Regulator for Low-Cost Battery Charging Systems
  PDF, 104 Kb, File published: Oct 3, 2002
• Download
  A New Production Technique for Trimming Voltage Regulators
  PDF, 105 Kb, File published: Oct 3, 2002
• Download
  AB-12 Wide Adjustable Range PNP Voltage Regulator (Rev. B)
  PDF, 47 Kb, Revision: B, File published: May 6, 2013
  This application note discusses the PNP voltage regulator.
• Download
  AN-182 Improving Power Supply Reliability with IC Power Regulators (Rev. B)
  PDF, 82 Kb, Revision: B, File published: May 5, 2013
  This application report discusses improving power supply reliability with IC power regulators.
• Download
  AN-181 3-Terminal Regulator is Adjustable (Rev. B)
  PDF, 314 Kb, Revision: B, File published: May 5, 2013
  Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
• Download
  AN-1061 Power Conversion in Line-Powered Equipment (Rev. B)
  PDF, 406 Kb, Revision: B, File published: Apr 23, 2013
  This application note describes line-powered equipment and power conversion techniques or methods tosolve those typical power needs.
• Download
  Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)
  PDF, 284 Kb, Revision: A, File published: May 5, 2013
  When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
• Download
  AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
  PDF, 814 Kb, Revision: A, File published: May 6, 2013
  The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
• Download
  AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)
  PDF, 300 Kb, Revision: B, File published: May 6, 2013
  This application note discusses the operation and compensation of linear regulators.
• Download
  Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
  PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
• Download
  Understanding the Terms and Definitions of LDO Voltage Regulators
  PDF, 197 Kb, File published: Oct 21, 1999
  This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
• Download
  Packaging Limits Range of Linear Regulators
  PDF, 75 Kb, File published: May 8, 2010
  The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
• Download
  A Topical Index of TI LDO Application Notes (Rev. F)
  PDF, 82 Kb, Revision: F, File published: Jun 27, 2019
• Download
  LDO Noise Demystified (Rev. A)
  PDF, 785 Kb, Revision: A, File published: Aug 9, 2017
  Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.
• Download
  LDO PSRR Measurement Simplified (Rev. A)
  PDF, 131 Kb, Revision: A, File published: Aug 9, 2017
  This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods

Model Line

Manufacturer's Classification

• Semiconductors > Analog and Mixed-Signal > Power Management > Linear Regulator (LDO) > Single Channel LDO