Datasheet Texas Instruments LF353M/NOPB

ManufacturerTexas Instruments
SeriesLF353-N
Part NumberLF353M/NOPB
Datasheet Texas Instruments LF353M/NOPB

Wide Bandwidth Dual JFET Input Operational Amplifier 8-SOIC 0 to 70

Datasheets

LF353 Wide Bandwidth Dual JFET Input Operational Amplifier datasheet
PDF, 1.0 Mb, Revision: F, File published: Mar 25, 2013
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin88
Package TypeDD
Industry STD TermSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY9595
CarrierTUBETUBE
Device MarkingMLF353
Width (mm)3.913.91
Length (mm)4.94.9
Thickness (mm)1.581.58
Pitch (mm)1.271.27
Max Height (mm)1.751.75
Mechanical DataDownloadDownload

Parametrics

Additional FeaturesN/A
ArchitectureFET
CMRR(Min)70 dB
CMRR(Typ)100 dB
GBW(Typ)4 MHz
Input Bias Current(Max)200 pA
Iq per channel(Max)3.25 mA
Iq per channel(Typ)1.8 mA
Number of Channels2
Offset Drift(Typ)10 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)20 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailIn to V+
RatingCatalog
Slew Rate(Typ)13 V/us
Total Supply Voltage(Max)36 +5V=5, +/-5V=10
Total Supply Voltage(Min)10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)16 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)10 mV

Eco Plan

RoHSCompliant

Application Notes

  • AN-447 Protection Schemes for BI-FET Amplifiers and Switches
    PDF, 80 Kb, File published: May 2, 2004
    Application Note 447 Protection Schemes for BI-FET Amplifiers and Switches
  • AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)
    PDF, 262 Kb, Revision: B, File published: May 6, 2013
    Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor
  • AN-263 Sine Wave Generation Techniques (Rev. C)
    PDF, 747 Kb, Revision: C, File published: Apr 22, 2013
    This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels.
  • AN-262 Applying Dual and Quad FET Op Amps (Rev. B)
    PDF, 1.1 Mb, Revision: B, File published: May 6, 2013
    The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab
  • Get More Power Out of Dual or Quad Op-Amps
    PDF, 91 Kb, File published: Oct 2, 2002

Model Line

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps