Datasheet Texas Instruments LM3444MA/NOPB
| Manufacturer | Texas Instruments |
| Series | LM3444 |
| Part Number | LM3444MA/NOPB |
AC-DC Offline LED Driver 8-SOIC -40 to 125
Datasheets
LM3444 AC-DC Offline LED Driver datasheet
PDF, 1.1 Mb, Revision: D, File published: Dec 31, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 95 | 95 |
| Carrier | TUBE | TUBE |
| Device Marking | MA | L3444 |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Download | Download |
Parametrics
| Dimming Method | Analog |
| Input Voltage | AC/DC Type |
| Iout(Max) | 2 A |
| Iq(Typ) | 1.58 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Power Factor Correction | Active,Passive Min |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Adjustable Switch Frequency,Thermal Shutdown |
| Switching Frequency(Max) | 1000 kHz |
| Switching Frequency(Min) | 30 kHz |
| Topology | Buck,Flyback |
| Type | Inductive |
| Vin(Max) | 13 V |
| Vin(Min) | 8 V |
| Vout(Max) | 60 V |
| Vout(Min) | 9 V |
| Vref | 0.75 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LM3444MR16BBRB
LM3444 Buck-Boost Topology MR16 LED Bulb Reference Design
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3444-230VFLBK
LM3444 -230VAC, 8W Isolated Flyback LED Driver (no dim) Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3444MR16BSTRB
LM3444 Boost Topology MR16 LED Bulb Reference Design
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3444-120VFLBK
LM3444 -120VAC, 8W Isolated Flyback LED Driver (no dim) Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3444-EDSNEV
LM3444 A19 Edison Retrofit LED Driver (no dim) Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- An Improved Line Regulation Solution Used in LM3444/5 Non-Isolated LED LightingPDF, 1.0 Mb, File published: Oct 25, 2012
- AN-2097 LM3444 - 230VAC, 8W Isolated Flyback LED Driver (Rev. F)PDF, 5.4 Mb, Revision: F, File published: May 1, 2013
This is a four-layer board using the bottom and top layer for component placement. The demonstration board can be modified to adjust the LED forward current, the number of series connected LEDs that are driven and the switching frequency. - AN-2082 LM3444 -120VAC, 8W Isolated Flyback LED Driver (Rev. E)PDF, 6.4 Mb, Revision: E, File published: May 1, 2013
This demonstration board highlights the performance of a LM3444 based Flyback LED driver solution that can be used to power a single LED string consisting of 4 to 8 series connected LEDs from an 90 VRMS to 135 VRMS, 60 Hz input power supply. The key performance characteristics under typical operating conditions are summarized in this application note. - AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, Revision: A, File published: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and
Model Line
Series: LM3444 (4)
- LM3444MA/NOPB LM3444MAX/NOPB LM3444MM/NOPB LM3444MMX/NOPB
Manufacturer's Classification
- Semiconductors > Power Management > LED Driver > Illumination & General Lighting LED Driver
