Datasheet Texas Instruments CC1310F128RHBT

Manufacturer	Texas Instruments
Series	CC1310
Part Number	CC1310F128RHBT

Datasheets

Prices

Status

Packaging

Parametrics

Eco Plan

Design Kits & Evaluation Modules

• JTAG Emulators/ Analyzers: TMDSEMU200-U
  XDS200 USB Debug Probe
  Lifecycle Status: Active (Recommended for new designs)
  
• Evaluation Modules & Boards: LAUNCHXL-CC1310
  SimpleLinkВ™ Sub-1 GHz CC1310 wireless microcontroller (MCU) LaunchPadВ™ development kit
  Lifecycle Status: Active (Recommended for new designs)
  
  • Download
• Development Kits: LAUNCHXL-CC1350
  SimplelinkВ™ Sub-1 GHz & BluetoothВ® low energy CC1350 wireless MCU LaunchPadВ™ Dev Kit
  Lifecycle Status: Active (Recommended for new designs)
  
  • Download
• Development Kits: CC-ANTENNA-DK2
  Sub-1 GHz and 2.4 GHz Antenna Kit for LaunchPadВ™ and SensorTag
  Lifecycle Status: Active (Recommended for new designs)
  
  • Download
  • Download

Application Notes

• Download
  CC1310 Skyworks PA 433 MHz 20 dBm Reference Design Rev 2.x
  PDF, 505 Kb, File published: May 2, 2017
  The frequency range 426 MHz - 435 MHz is designated for ISM applications in several countries. This frequency range is commonly known as the 433 MHz band. Each country has their specific frequency band range and the China ISM band defined by SRRC is 430 MHz - 432 MHz and 433.00 MHz - 434.79 MHz.
• Download
  CC1310 Skyworks PA Chinese AMR Reference Design Rev 2.x
  PDF, 649 Kb, File published: Dec 12, 2016
  This application report is targeting the Chinese AMR market (470 MHz to 510 MHz) with CC1310. To enhance the wireless operation range in China, TI provides the range extender reference design. The initial design was based upon a discrete PA solution. To simplify the RF front design, TI worked with Skyworks Solutions to integrate the CC1310 wireless MCU with a compact, cost-effective front-end modu
• Download
  Using the CC13xx Under ARIB STD-T108
  PDF, 1.1 Mb, File published: Aug 24, 2015
  This application report outlines the expected performance when operating CC1310 under ARIB STD-T108 in the 920 MHz frequency band. It is assumed that you are familiar with CC1310 and ARIB STD-T108 regulatory limits. Lab measurements show that CC1310 meets ARIB STD-T108 requirements.
• Download
  CC1310 Integrated Passive Component for 779-928 MHz (Rev. A)
  PDF, 3.0 Mb, Revision: A, File published: Dec 6, 2016
• Download
  Using CC1190 Front End With CC13xx Under EN300220
  PDF, 238 Kb, File published: Mar 9, 2017
• Download
  Using CC1190 Front End With CC13xx Under FCC 15.247
  PDF, 218 Kb, File published: Mar 9, 2017
• Download
  Wireless Motion Detector With Sub-1 GHz SimpleLinkв„ў Wireless MCU
  PDF, 374 Kb, File published: May 18, 2017
  This application note discusses the main challenges related to wireless motion detector design and how they are addressed by the SimpleLink Sub-1 GHz CC1310 and SimpleLink Dual-band CC1350 wireless MCUs. First, the application note gives a short overview of a wireless motion detector. Then the application report discusses the wireless technology requirements which must be met to support motion det
• Download
  CC1310 Discrete PA Chinese AMR Reference Design Rev 1.x
  PDF, 811 Kb, File published: Dec 12, 2015
  Automatic Meter Reading (AMR) automatically collects the information on the amount of water, electric or gas that has been consumed by each household. When the AMR information is received, the exact energy amount can be charged from the energy supplier company. Traditionally, this has been done by manual reading of meters, but this can now be done automatically with wireless technology.Seve
• Download
  Wireless Smoke Alarms With Sub-1GHz SimpleLink Wireless MCU
  PDF, 146 Kb, File published: Jun 22, 2017
  This application report discusses the main challenges related to wireless smoke alarm designs and how they are addressed by the CC1310 and CC1350 wireless MCUs.
• Download
  CC13x0 IQ Samples
  PDF, 172 Kb, File published: Aug 16, 2017
  This application report describes an IQ dump patch for the CC13xx SimpleLinkв„ў Sub-1 GHz ultra-low power wireless microcontroller (MCU).
• Download
  CC13xx wM-Bus S-Mode
  PDF, 223 Kb, File published: Mar 31, 2017
  This application note describes a wM-Bus S-mode patch for the CC13xx SimpleLinkв„ў Sub-1 GHz ultra-lowpower wireless microcontroller (MCU). Measurements show that CC13xx meets EN13757-4:2012 specifications with margin.
• Download
  Wireless Door and Window Sensors With Sub-1GHz SimpleLink Wireless MCU
  PDF, 89 Kb, File published: Sep 26, 2017
  This application report discusses the main challenges related to wireless door and window sensor design and how they are addressed by CC1310 and CC1350 wireless MCU. First it gives a short overview of what a wireless door and window sensor is. Then, it discusses wireless technology requirements for door and window sensors and other security system use-cases. The application report validates the Su
• Download
  CC13x0 Low Data Rate Operation
  PDF, 147 Kb, File published: Jun 26, 2017
• Download
  CC13xx Antenna Diversity (Rev. B)
  PDF, 2.0 Mb, Revision: B, File published: Mar 31, 2017
  This application report describes a preamble quality-based antenna-diversity patch for the CC13xxSimpleLinkв„ў Sub-1 GHz ultra-low power wireless microcontroller (MCU).
• Download
  CC13xx Combined wM-Bus C-Mode and T-Mode Application Note (Rev. D)
  PDF, 703 Kb, Revision: D, File published: Mar 31, 2017
  This application note describes a combined wM-Bus C-Mode and T-Mode patch for the CC13xxSimpleLinkв„ў Sub-1 GHz ultra-low power wireless microcontroller.
• Download
  Achieving Optimum Radio Range (Rev. A)
  PDF, 8.7 Mb, Revision: A, File published: Sep 5, 2017
  This application report addresses the parameters that affect the radio range. For identical radio settings, the range is highly dependent on the surroundings and environment. The link budget and the positioning of the antennas and their distance to the ground surface are major contributors to long range. A general specific range can never be specified or guaranteed for any type of radio communicat
• Download
  Using GCC/GDB With SimpleLink CC26xx
  PDF, 1.0 Mb, File published: Feb 23, 2015
  This application report describes how to set up an open source software-based development environment for the SimpleLink CC26xx and CC13xx wireless MCUs using Eclipse as integrated development environment (IDE).
• Download
  Crystal Oscillator and Crystal Selection for the CC26xx and CC13xx Wireless MCUs (Rev. F)
  PDF, 886 Kb, Revision: F, File published: Aug 10, 2017
• Download
  CC2640 Wireless MCU DC Supply Evaluation
  PDF, 1.3 Mb, File published: Oct 5, 2015
  CC2640 Wireless MCU DC Supply Evaluation /WTBU/WCS/Bluetooth/AppReports/SWRA494/SWRA494
• Download
  CC2538/CC26xx Bootloader Interface (Rev. A)
  PDF, 277 Kb, Revision: A, File published: May 21, 2015
  This application report provides a brief overview on the serial bootloader that resides in ROM on the CC2538 and CC13xx/CC26xx devices. This document shows how the bootloader protocol can be used to perform basic operations like erasing and programming the flash of the devices. The device bootloaders support universal asynchronous receiver/transmitter (UART) and serial peripheral interface (SPI) a
• Download
  CC-Antenna-DK2 and Antenna Measurements Summary
  PDF, 14.8 Mb, File published: Mar 3, 2016
  The purpose of the antenna development kit (CC-Antenna-DK2) is to ease the decision of which type of low-cost antenna can be implemented as well as give an estimation of the performance that can be achieved.
• Download
  DN035 -- Antenna Quick Guide (Rev. A)
  PDF, 138 Kb, Revision: A, File published: Feb 12, 2013

Model Line

Manufacturer's Classification

• Semiconductors > Wireless Connectivity > Sub-1 GHz > SimpleLink CC1310