Datasheet Texas Instruments CD54HC74
| Manufacturer | Texas Instruments |
| Series | CD54HC74 |
High Speed CMOS Logic Dual Positive-Edge Trigger D Flip-Flops with Set and Reset
Datasheets
CD54HC74, CD74HC74, CD54HCT74, CD74HCT74 datasheet
PDF, 727 Kb, Revision: D, File published: Aug 21, 2003
Extract from the document
Prices
Status
| CD54HC74F | CD54HC74F3A | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No |
Packaging
| CD54HC74F | CD54HC74F3A | |
|---|---|---|
| N | 1 | 2 |
| Pin | 14 | 14 |
| Package Type | J | J |
| Industry STD Term | CDIP | CDIP |
| JEDEC Code | R-GDIP-T | R-GDIP-T |
| Package QTY | 1 | 1 |
| Carrier | TUBE | TUBE |
| Device Marking | CD54HC74F | 8405601CA |
| Width (mm) | 6.67 | 6.67 |
| Length (mm) | 19.56 | 19.56 |
| Thickness (mm) | 4.57 | 4.57 |
| Pitch (mm) | 2.54 | 2.54 |
| Max Height (mm) | 5.08 | 5.08 |
| Mechanical Data | Download | Download |
Parametrics
| Parameters / Models | CD54HC74F | CD54HC74F3A |
|---|---|---|
| 3-State Output | No | No |
| Bits | 2 | 2 |
| F @ Nom Voltage(Max), Mhz | 28 | 28 |
| ICC @ Nom Voltage(Max), mA | 0.04 | 0.04 |
| Input Type | CMOS | CMOS |
| Operating Temperature Range, C | -55 to 125 | -55 to 125 |
| Output Drive (IOL/IOH)(Max), mA | 5.2/-5.2 | 5.2/-5.2 |
| Output Type | CMOS | CMOS |
| Package Group | CDIP | CDIP |
| Package Size: mm2:W x L, PKG | See datasheet (CDIP) | See datasheet (CDIP) |
| Rating | Military | Military |
| Technology Family | HC | HC |
| VCC(Max), V | 6 | 6 |
| VCC(Min), V | 2 | 2 |
| tpd @ Nom Voltage(Max), ns | 37 | 37 |
Eco Plan
| CD54HC74F | CD54HC74F3A | |
|---|---|---|
| RoHS | See ti.com | See ti.com |
Application Notes
- Selecting the Right Texas Instruments Signal SwitchPDF, 769 Kb, File published: Sep 7, 2001
Texas Instruments offers a wide variety of electronic switches (digital analog bilateral bilateral analog) in a variety of families including CBT CBTLV HC LV and LVC. Depending on the application the right solution may be an analog switch that passes digital signals or vice versa. This application report summarizes the various switching technologies and provides considerations for choosi - Power-Up Behavior of Clocked Devices (Rev. A)PDF, 34 Kb, Revision: A, File published: Feb 6, 2015
- Using High Speed CMOS and Advanced CMOS in Systems With Multiple VccPDF, 43 Kb, File published: Apr 1, 1996
Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren - SN54/74HCT CMOS Logic Family Applications and RestrictionsPDF, 102 Kb, File published: May 1, 1996
The TI SN54/74HCT family of CMOS devices is a subgroup of the SN74HC series with the HCT circuitry modified to meet the interfacing requirements of TTL outputs to high-speed CMOS inputs. The HCT devices can be driven by the TTL circuits directly without additional components. This document describes the TTL/HC interface the operating voltages circuit noise and power consumption. A Bergeron anal
Model Line
Series: CD54HC74 (2)
Manufacturer's Classification
- Semiconductors> Space & High Reliability> Logic Products> Flip-Flop/Latch/Registers
