Datasheet Texas Instruments CDC906
| Manufacturer | Texas Instruments |
| Series | CDC906 |
Custom Programmed 3-PLL Clock Synthesizer / Multiplier / Divider
Datasheets
Programmable 3-PLL Clock Synthesizer / Multiplier / Divider datasheet
PDF, 1.4 Mb, Revision: B, File published: Feb 11, 2008
Extract from the document
Prices
Status
| CDC906PW | CDC906PWG4 | CDC906PWR | CDC906PWRG4 | |
|---|---|---|---|---|
| Lifecycle Status | NRND (Not recommended for new designs) | NRND (Not recommended for new designs) | NRND (Not recommended for new designs) | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No | No | No | No |
Packaging
| CDC906PW | CDC906PWG4 | CDC906PWR | CDC906PWRG4 | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 20 | 20 | 20 | 20 |
| Package Type | PW | PW | PW | PW |
| Industry STD Term | TSSOP | TSSOP | TSSOP | TSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 70 | 70 | 2000 | 2000 |
| Carrier | TUBE | TUBE | LARGE T&R | LARGE T&R |
| Device Marking | CDC906 | CDC906 | CDC906 | CDC906 |
| Width (mm) | 4.4 | 4.4 | 4.4 | 4.4 |
| Length (mm) | 6.5 | 6.5 | 6.5 | 6.5 |
| Thickness (mm) | 1 | 1 | 1 | 1 |
| Pitch (mm) | .65 | .65 | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 | 1.2 | 1.2 |
| Mechanical Data | Download | Download | Download | Download |
Eco Plan
| CDC906PW | CDC906PWG4 | CDC906PWR | CDC906PWRG4 | |
|---|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant | Compliant |
Application Notes
- CDCx706/x906 Termination and Signal Integrity Guidelines (Rev. A)PDF, 155 Kb, Revision: A, File published: Nov 28, 2007
This application report shows and evaluates different schemes for the CDCE706, CDCE906, CDC706, and CDC906. Guidelines for optimizing the series termination are discussed. Additionally, this report describes how the CDCx706/x906 family can be used to drive 1.8-V clock inputs. - High Speed Layout Guidelines (Rev. A)PDF, 762 Kb, Revision: A, File published: Aug 8, 2017
Thisapplicationreportaddresseshigh-speedsignals,suchas clocksignalsand theirrouting,and givesdesignersa reviewof the importantcoherences.Withsomesimplerules,electromagneticinterferenceproblemscan be minimizedwithoutusingcomplicatedformulasand expensivesimulationtools.Section1givesa shortintroductionto theory,whileSection - Clock Recommendations for the DM643x EVMPDF, 121 Kb, File published: Nov 29, 2006
The DM643x evaluation module (EVM) requires several clock frequencies to run the system properly. The current clocking proposal of the low-cost EVM consists of the VCXO chip PI6CX100-27W, the PLL chip PLL1705, several bus drivers, and a few oscillaors and crystals. This application report discusses several optimized clocking proposals with the Texas Instruments new clock drivers and recommends a m
Model Line
Series: CDC906 (4)
Manufacturer's Classification
- Semiconductors> Clock and Timing> Clock Generators> General Purpose
