Datasheet Texas Instruments DS90UR124IVS/NOPB

ManufacturerTexas Instruments
SeriesDS90UR124
Part NumberDS90UR124IVS/NOPB
Datasheet Texas Instruments DS90UR124IVS/NOPB

5-43MHz DC-Balanced 24-Bit FPD-Link II Deserializer 64-TQFP -40 to 105

Datasheets

DS90URxxx-Q1 5-MHz to 43-MHz DC-Balanced 24-Bit FPD-Link II Serializer and Deserializer Chipset datasheet
PDF, 1.4 Mb, Revision: O, File published: Apr 29, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin6464
Package TypePAGPAG
Industry STD TermTQFPTQFP
JEDEC CodeS-PQFP-GS-PQFP-G
Package QTY160160
Device MarkingIVSDS90UR124
Width (mm)1010
Length (mm)1010
Thickness (mm)11
Pitch (mm).5.5
Max Height (mm)1.21.2
Mechanical DataDownloadDownload

Parametrics

Color Depth18 bpp
DiagnosticsBIST
EMI ReductionAdjustable Progressive Turn On (PTO),Slew Rate Control
FunctionDeserializer
Input CompatibilityFPD-Link II LVDS
Operating Temperature Range-40 to 105 C
Output CompatibilityLVCMOS
Package GroupTQFP
Package Size: mm2:W x L64TQFP: 144 mm2: 12 x 12(TQFP) PKG
Pixel Clock Min5 MHz
Pixel Clock(Max)43 MHz
RatingCatalog
Signal Conditioning-
Special Features-
Total Throughput1032 Mbps

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: SERDESUR-43USB
    Evaluation Kit for DS90UR241 DS90UR124 Serializer and Deserializer Chipset
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • AN-2068 DS90UR241/124 Spread Spectrum Tolerance Support (Rev. B)
    PDF, 70 Kb, Revision: B, File published: Apr 26, 2013
    Compliance to EMI limits is often a challenge. Spread spectrum clocking is commonly used to minimize EMI. The effect of modulating periodic signals, both clock and data, reduces the peak emissions by spreading the energy over a range of frequencies. The DS90UR241 and DS90UR124 chipset allows the use of spread spectrum clock and data inputs. The following is a discussion of spread spectrum clock ch
  • AN-1807 FPD-Link II Display SerDes Overview (Rev. B)
    PDF, 45 Kb, Revision: B, File published: Apr 26, 2013
    TI’s FPD-Link II family of embedded clock LVDS SerDes provide enhanced features, and improved signal quality over prior generations of FPD-Link SerDes devices for Display applications. FPD-Link Chipsets serialized the wide parallel RGB buses down to 4 or 5 pairs of LVDS signaling depending upon the chipset. 18-bit RGB was serialized to three LVDS data lines and a LVDS clock, while 24-bit RGB was s
  • LVDS Repeaters and Crosspoints Extend the Reach of FPD-Link II Interfaces (Rev. A)
    PDF, 101 Kb, Revision: A, File published: Apr 29, 2013
    This application note introduces Texas Instrument’s LVDS devices with built-in pre-emphasis andequalization circuits, recommends when it makes sense to employ them with the FPD-Link II SER/DES,shows how to optimally interface them to the SER/DES, and discusses distance gains that may berealized with their signal enhancing functions.
  • Extending the Reach of a FPD-Link II Interface with Cable Drivers and Equalizers (Rev. A)
    PDF, 118 Kb, Revision: A, File published: Apr 26, 2013
    TI's family of embedded clock LVDS SER/DES (FPD-link II) provides a 2-wire serial interface for displayapplications up to distances of 10 meters.
  • DS15BA101 & DS15EA101 Enable Long Reach Applications for Embedded Clock SER/DES (Rev. E)
    PDF, 170 Kb, Revision: E, File published: Apr 29, 2013
    Reduction in system size, increase in system performance and savings in system cost are valuablebenefits that SER/DES devices (Serializers and Deserializers) bring to many system designers. Thesebenefits are the reason why SER/DES are integral pieces of many of today’s high-speed systems.One of the design constraints for these systems is the maximum transmission distance between a serializer

Model Line

Series: DS90UR124 (2)

Manufacturer's Classification

  • Semiconductors > Interface > FPD-Link SerDes > Display SerDes