Datasheet Texas Instruments LDC1051NHRR
| Manufacturer | Texas Instruments |
| Series | LDC1051 |
| Part Number | LDC1051NHRR |
8-bit Rp only Inductance-to-Digital Converter with SPI for Inductive Sensing Applications 16-WSON -40 to 125
Datasheets
LDC1051: 8-bit Rp only Inductance-to-Digital Converter with SPI datasheet
PDF, 3.1 Mb, File published: Mar 13, 2014
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 16 |
| Package Type | NHR |
| Industry STD Term | WSON |
| JEDEC Code | R-PDSO-N |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | LDC1051 |
| Width (mm) | 4 |
| Length (mm) | 5 |
| Thickness (mm) | .8 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Download |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LDC1051EVM
LDC1051 Inductance-to-digital converter with SPI Interface Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Using Multiple Sensors With LDC1000PDF, 74 Kb, File published: Mar 2, 2015
- Configuring Inductive-to-Digital-Converters for Parallel Resistance (RP) Variati (Rev. A)PDF, 255 Kb, Revision: A, File published: Jun 1, 2015
This application note reviews sensor RP configuration for LDC devices. LDC1000, LDC1041, LDC1051, LDC1312, LDC1314, LDC1612, LDC1614 are covered in this note. Clear understanding on how to set the RP_MIN and RP_MAX registers is necessary for not only RP measurements, but also for optimum L measurements. The fundamental principle of RP measurements is that magnetic fields from an LC circuit ge - LDC Device Selection Guide (Rev. B)PDF, 360 Kb, Revision: B, File published: Mar 21, 2017
- LDC Sensor DesignPDF, 1.0 Mb, File published: Mar 24, 2015
Getting the best performance out of an LDC requires a sensor suitable for the measurement. This app-note covers the parameters to consider when designing a sensor for a specific application. Specific areas of focus include the physical routing characteristics of PCB based sensors, considerations for the sensor capacitor, and techniques to minimize or compensate for parasitic effects. - LDC1xxx LDC Target Design (Rev. A)PDF, 907 Kb, Revision: A, File published: May 9, 2017
Texas Instruments’ Inductive-to-Digital Converter (LDC) technology can accurately measure with a wide variety of target sizes, shapes, and material composition. There are several target design guidelines to maximize the effectiveness of an LDC measurement system. This application note covers the relevant factors of target design that affect inductive sensing, and provides guide
Model Line
Series: LDC1051 (3)
- LDC1051NHRJ LDC1051NHRR LDC1051NHRT
Manufacturer's Classification
- Semiconductors > Sensing Products > Inductive Sensing > Inductance to Digital Converters
