Datasheet Texas Instruments LM395
| Manufacturer | Texas Instruments |
| Series | LM395 |
Ultra Reliable Power Transistor
Datasheets
LM195/LM395 Ultra Reliable Power Transistors datasheet
PDF, 1.8 Mb, Revision: C, File published: Apr 7, 2013
Extract from the document
Prices
Status
| LM395T | LM395T/NOPB | |
|---|---|---|
| Lifecycle Status | NRND (Not recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes |
Packaging
| LM395T | LM395T/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 3 | 3 |
| Package Type | NDE | NDE |
| Industry STD Term | TO-220 | TO-220 |
| JEDEC Code | R-MSFM-P | R-MSFM-P |
| Package QTY | 45 | 45 |
| Carrier | TUBE | TUBE |
| Device Marking | LM395T | LM395T |
| Width (mm) | 10.16 | 10.16 |
| Length (mm) | 14.986 | 14.986 |
| Thickness (mm) | 4.572 | 4.572 |
| Pitch (mm) | 2.54 | 2.54 |
| Max Height (mm) | 4.7 | 4.7 |
| Mechanical Data | Download | Download |
Parametrics
| Parameters / Models | LM395T | LM395T/NOPB |
|---|---|---|
| Package Group | TO-220 | TO-220 |
| Package Size: mm2:W x L, PKG | See datasheet (TO-220) | See datasheet (TO-220) |
Eco Plan
| LM395T | LM395T/NOPB | |
|---|---|---|
| RoHS | See ti.com | Compliant |
Application Notes
- AN-293 Control Applications of CMOS DACsPDF, 424 Kb, File published: May 10, 2004
Application Note 293 Control Applications of CMOS DACs - AN-161 IC Voltage Reference has 1В ppm per Degree Drift (Rev. C)PDF, 275 Kb, Revision: C, File published: May 6, 2013
A new linear IC now provides the ultimate in highly stable voltage references. Now, a new monolithic IC the LM199, out-performs zeners and can provide a 6.9 V reference with a temperature drift of less than 1 ppm/CВ° and excellent long term stability. This new IC, uses a unique subsurface zener to achieve low noise and a highly stable breakdown. Included is an on-chip temperature stabilizer that ho - AN-173 IC Zener Eases Reference Design (Rev. B)PDF, 137 Kb, Revision: B, File published: May 5, 2013
A new IC zener with low dynamic impedance and wide operating current range significantly simplifies reference or regulator circuit design. The low dynamic impedance provides better regulation against operating current changes, easing the requirements of the biasing supply. Further, the temperature coefficient is independent of operating current, so that the LM129 can be used at - AN-460 LM34/LM35 Precision Monolithic Temperature Sensors (Rev. C)PDF, 495 Kb, Revision: C, File published: May 1, 2013
This application report discusses the details and uses of the Texas Instruments LM34 and LM35 asprecision temperature sensors. - General Purpose Power SupplyPDF, 94 Kb, File published: Oct 3, 2002
- AN-262 Applying Dual and Quad FET Op Amps (Rev. B)PDF, 1.1 Mb, Revision: B, File published: May 6, 2013
The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab - AN-181 3-Terminal Regulator is Adjustable (Rev. B)PDF, 314 Kb, Revision: B, File published: May 5, 2013
Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
Model Line
Series: LM395 (2)
Manufacturer's Classification
- Semiconductors> Power Drivers> Power Transistors
