Datasheet Texas Instruments LM5069MMX-1/NOPB
| Manufacturer | Texas Instruments |
| Series | LM5069 |
| Part Number | LM5069MMX-1/NOPB |
Positive High Voltage Hot Swap / Inrush Current Controller with Power Limiting 10-VSSOP -40 to 125
Datasheets
LM5069 Positive High-Voltage Hot Swap and In-Rush Current Controller With Power Limiting datasheet
PDF, 2.1 Mb, Revision: E, File published: Nov 30, 2016
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 10 |
| Package Type | DGS |
| Industry STD Term | VSSOP |
| JEDEC Code | S-PDSO-G |
| Package QTY | 3500 |
| Carrier | LARGE T&R |
| Device Marking | SNAB |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | 1.02 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.07 |
| Mechanical Data | Download |
Parametrics
| Channel(s) Controlled | 1 |
| Current Limit Accuracy | 46.5 mV +/- 12% |
| Current Limit Function Enabled | Always |
| Current Limit Threshold(Typ) | 46.5 Ext FET=mV |
| Current Measurement Accuracy | N/A % |
| Design Support | Calculation Tool,EVM,Simulation Model,WEBENCH Design |
| FET Protection | SOA |
| Fault Response | Auto Retry,Latch Off |
| ON_OFF Control Input | EN s |
| Operating Temperature Range | -40 to 125 C |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 10VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rating | Catalog |
| Status Output | PG |
| Vabsmax_cont | 100 V |
| Vin(Max) | 80 V |
| Vin(Min) | 9 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LM5069EVM-627
LM5069EVM-627 High Voltage Reverse Hookup Reverse Current Hotswap Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM5069EVAL
Positive High Voltage Hot Swap Inrush Current Controller with Power Limiting Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Stopping Reverse Current Flow in Standard Hot Swap ApplicationsPDF, 164 Kb, File published: Jul 11, 2012
- AN-1304 LM5068 -48V Hot Swap Controller (Rev. A)PDF, 70 Kb, Revision: A, File published: May 6, 2013
This application report explains the function and design of components connected to MOSFET’s gateterminal that limit inrush currents during insertion of a module into a live backplane when using theLM5068 without external current sense resistor. - Surge Stopping and Reverse Voltage Protection with the LM5069PDF, 393 Kb, File published: Apr 11, 2013
Many automotive and industrial applications require protection from a wide range of input supply insertion errors and voltage surges. Automotive voltage rails can exceed 40V during a load dump event, and at the same time, protection circuitry can encounter negative voltage surges below -24V during a reversal of the battery polarities. Several devices are available to block or clamp these events, h - Output Voltage Clamping Using the LM5069 Hot Swap Controller (Rev. B)PDF, 472 Kb, Revision: B, File published: May 6, 2013
This application report discusses using an output voltage clamp with the Texas Instruments LM5069 Hot Swap Contoller.
Model Line
Series: LM5069 (5)
- LM5069MM-1/NOPB LM5069MM-2 LM5069MM-2/NOPB LM5069MMX-1/NOPB LM5069MMX-2/NOPB
Manufacturer's Classification
- Semiconductors > Power Management > Protection, Monitoring and Hot Swap > Hot Swap Controllers (Positive, -48V)
Other Names:
LM5069MMX1/NOPB, LM5069MMX 1/NOPB
