Datasheet Texas Instruments PGA450-Q1
| Manufacturer | Texas Instruments |
| Series | PGA450-Q1 |
Ultrasonic Sensor Signal Processor with Integrated Microcontroller (MCU)
Datasheets
PGA450-Q1 Ultrasonic-Sensor Signal Conditioner datasheet
PDF, 1.1 Mb, Revision: D, File published: Jun 7, 2016
Extract from the document
Prices
Status
| PGA450TPWRQ1 | |
|---|---|
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| PGA450TPWRQ1 | |
|---|---|
| N | 1 |
| Pin | 28 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | PGA450 |
| Width (mm) | 4.4 |
| Length (mm) | 9.7 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| Parameters / Models | PGA450TPWRQ1 |
|---|---|
| # Input Channels | 1 |
| Active Supply Current(Max), mA | 15 |
| Active Supply Current(Typ), mA | 5 |
| Interface | LIN / SCI, UART, GPIO, SPI |
| Operating Temperature Range, C | -40 to 125 |
| Package Group | TSSOP |
| Package Size: mm2:W x L, PKG | 28TSSOP: 62 mm2: 6.4 x 9.7(TSSOP) |
| Rating | Automotive |
| Special Features | Fully integrated |
| Supply Voltage, Min | 18 |
Eco Plan
| PGA450TPWRQ1 | |
|---|---|
| RoHS | Compliant |
Application Notes
- Optimizing Performance of the PGA450-Q1PDF, 156 Kb, File published: Jun 23, 2015
The PGA450-Q1 device must be optimized and fine-tuned for each particular application. All supporting materials provided by TI for the PGA450-Q1 have been optimized for Texas Instruments' lab-bench setup. The PGA450-Q1 device is not ensured to perform identically in an end-user’s test environment because of varying environmental factors.These factors include temperature, humidity, air p - Using a fixed threshold in ultrasonic distance-ranging automotive applicationsPDF, 753 Kb, File published: Jul 17, 2012
- LIN Demonstration using PGA450Q1EVM Firmware Rev 2.1 (Rev. A)PDF, 644 Kb, Revision: A, File published: Jul 13, 2015
This demonstration is intended to illustrate the method of using the internal 8051 MCU firmware of the PGA450-Q1 device to calculate the time of flight (tof) using LIN communication to trigger a distance computation. The settings for short distance measurements have been updated from Rev. 2.0 to Rev 2.1 of the firmware. Differences include an optimized threshold algorithm (optimized for the TI set - Automatic Slave Node Position Detection (SNPD) for PGA450-Q1PDF, 50 Kb, File published: Jun 17, 2015
This application note describes how to automatically detect the position of the slave nodes on the LIN bus and assign a unique ID to each device. - PGA450-Q1 Reset Issue During VPWR Ramp DownPDF, 35 Kb, File published: May 24, 2016
During a VPWR ramp down, the 8051W microcontroller comes out of reset incorrectly when VPWR is between the typical values of 3.5 V and 3.2 V which leads to faulty code execution. This application report describes this issue and the workaround for this issue. - 3Q 2012 Issue Analog Applications JournalPDF, 4.5 Mb, File published: Jul 17, 2012
Model Line
Series: PGA450-Q1 (1)
Manufacturer's Classification
- Semiconductors> Sensing Products> Ultrasonic Sensing
