Datasheet Texas Instruments CLVC1G175MDCKREP
| Manufacturer | Texas Instruments |
| Series | SN74LVC1G175-EP |
| Part Number | CLVC1G175MDCKREP |
Enhanced Product Single D-Type Flip-Flop With Asynchronous Clear 6-SC70 -55 to 125
Datasheets
SN74LVC1G175-EP datasheet
PDF, 748 Kb, Revision: A, File published: Dec 14, 2010
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 6 |
| Package Type | DCK |
| Industry STD Term | SOT-SC70 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | BUD |
| Width (mm) | 1.25 |
| Length (mm) | 2 |
| Thickness (mm) | .9 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Download |
Parametrics
| 3-State Output | No |
| Bits | 1 |
| F @ Nom Voltage(Max) | 150 Mhz |
| Gate Type | FLIP-FLOP |
| ICC @ Nom Voltage(Max) | 0.01 mA |
| Input Type | CMOS/TTL |
| Logic | True |
| Operating Temperature Range | -55 to 125 C |
| Output Drive (IOL/IOH)(Max) | 32/-32 mA |
| Output Type | CMOS |
| Package Group | SC70 |
| Package Size: mm2:W x L | 6SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rating | HiRel Enhanced Product |
| Schmitt Trigger | No |
| Sub-Family | D-Type Flip-Flop |
| Technology Family | LVC |
| VCC(Max) | 5.5 V |
| VCC(Min) | 1.65 V |
| Voltage(Nom) | 1.8,2.5,3.3,5 V |
| tpd @ Nom Voltage(Max) | 16,9,8,5 ns |
Eco Plan
| RoHS | Compliant |
Application Notes
- 16-Bit Widebus Logic Families in 56-Ball 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B)PDF, 895 Kb, Revision: B, File published: May 22, 2002
TI?s 56-ball MicroStar Jr.E package registered under JEDEC MO-225 has demonstrated through modeling and experimentation that it is an optimal solution for reducing inductance and capacitance improving thermal performance and minimizing board area usage in integrated bus functions. Multiple functions released in the 56-ball MicroStar Jr.E package have superior performance characteristics compa - Use of the CMOS Unbuffered Inverter in Oscillator CircuitsPDF, 796 Kb, File published: Nov 6, 2003
CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly - LVC Characterization InformationPDF, 114 Kb, File published: Dec 1, 1996
This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices. - Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)PDF, 105 Kb, Revision: A, File published: Aug 1, 1997
The spectrum of bus-interface devices with damping resistors or balanced/light output drive currently offered by various logic vendors is confusing at best. Inconsistencies in naming conventions and methods used for implementation make it difficult to identify the best solution for a given application. This report attempts to clarify the issue by looking at several vendors? approaches and discussi - Understanding Advanced Bus-Interface Products Design GuidePDF, 253 Kb, File published: May 1, 1996
- Power-Up 3-State (PU3S) Circuits in TI Standard Logic DevicesPDF, 209 Kb, File published: May 10, 2002
Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features - How to Select Little Logic (Rev. A)PDF, 1.1 Mb, Revision: A, File published: Jul 26, 2016
TI Little Logic devices are logic-gate devices assembled in a small single- dual- or triple- gate package. Little Logic devices are widely used in portable equipment such as mobile phones MP3 players and notebook computers. Little Logic devices also are used in desktop computers and telecommunications. Little Logic gates are common components for easy PC board routing schematic design and b - Migration From 3.3-V To 2.5-V Power Supplies For Logic DevicesPDF, 115 Kb, File published: Dec 1, 1997
This application report explores the possibilities for migrating to 3.3-V and 2.5-V power supplies and discusses the implications.Customers are successfully using a wide range of low-voltage 3.3-V logic devices. These devices are within Texas Instruments (TI) advanced low-voltage CMOS (ALVC) crossbar technology (CBT) crossbar technology with integrated diode (CBTD) low-voltage crossbar techn - Texas Instruments Little Logic Application ReportPDF, 359 Kb, File published: Nov 1, 2002
Portable and consumer electronic systems? needs present greater challenges today than ever before. Engineers strive to design smaller faster lower-cost systems to meet the market demand. Consequently the semiconductor industry faces a growing need to increase operating speed minimize power consumption and reduce packaging size. Texas Instruments manufactures a variety of Little Logic semicond - Power-Up Behavior of Clocked Devices (Rev. A)PDF, 34 Kb, Revision: A, File published: Feb 6, 2015
Model Line
Series: SN74LVC1G175-EP (3)
- CLVC1G175MDCKREP CLVC1G175MDCKREPG4 V62/06633-01XE
Manufacturer's Classification
- Semiconductors > Space & High Reliability > Logic Products > Little Logic Products
