Datasheet Texas Instruments SN75LVDS86DGGG4
| Manufacturer | Texas Instruments |
| Series | SN75LVDS86 |
| Part Number | SN75LVDS86DGGG4 |
FlatLink™ Receiver 48-TSSOP 0 to 70
Datasheets
Flatlink Receiver datasheet
PDF, 400 Kb, Revision: D, File published: May 10, 2006
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 48 |
| Package Type | DGG |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 40 |
| Carrier | TUBE |
| Device Marking | SN75LVDS86 |
| Width (mm) | 6.1 |
| Length (mm) | 12.5 |
| Thickness (mm) | 1.15 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| Operating Temperature Range | 0 to 70 C |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) PKG |
| Protocols | Channel-Link I |
| Rating | Catalog |
| Supply Voltage(s) | 3.3 V |
Eco Plan
| RoHS | Compliant |
Application Notes
- Time Budgeting of the Flatlink Interface Application ReportPDF, 99 Kb, File published: Jun 11, 1997
This document describes the FlatLinkE point-to-point data-transmission interface that provides better than a two-to-one reduction in the number of signal lines used for synchronous parallel data-bus structures. - Flatlink Data Transmission System Design Overview (Rev. A)PDF, 127 Kb, Revision: A, File published: Jun 1, 2001
FlatLink is a data transmission system that can provide better than a 2:1 reduction in the number of signal lines used for synchronous parallel data bus structures with no loss in data throughput. To do this, FlatLink takes single-ended data at clock rates of up to 68 MHz and increases the data signaling rate seven times up to 476 Mbps. The following report provides some design guidelinesfo
Model Line
Series: SN75LVDS86 (3)
- SN75LVDS86DGG SN75LVDS86DGGG4 SN75LVDS86DGGR
Manufacturer's Classification
- Semiconductors > Interface > LVDS/M-LVDS/PECL > SerDes/Channel-Link
