Datasheet Linear Technology LT1351CS8#TRPBF

Manufacturer	Linear Technology
Series	LT1351
Part Number	LT1351CS8#TRPBF

250µA, 3MHz, 200V/µsOperational Amplifier

Datasheets

Preview and Download

PDF, 312 Kb, Language: en, File uploaded: Aug 6, 2017, Pages: 16
250µA, 3MHz, 200V/µs Operational Amplifier

Extract from the document

Prices

Packaging

Package	SO-8
Package Code	S8
Package Index	05-08-1610 (S8)

Parametrics

Number of Channels	1
Unity Gain BW	3 MHz

Av Min Stable	1 V/V
Avol	38 dB
Common Mode Rejection Ratio	94 dB
Cload	1000000 pF
Demo Boards	DC417B
Design Tools	LTspice Model
Enoise 1/f Corner	10 Hz
Enoise Density	14 nV/rtHz
Export Control	no
Ibias	20 nA
Inoise	0.5 pA/rtHz
Inoise 1/f Corner	20 Hz
Ios	0.005 µA
Iout	45 mA
Isupply	0.25 mA
Operating Temperature Range	0 to 70 °C
Over-the-Top	no
PSRR	106 dB
Rail-to-Rail In	no
Rail-to-Rail Out	no
SR	200 V/µs
Shutdown	yes
Single Supply	no
Ts (0.1%)	700 ns
Type	VFB
VinCM High (from V+)	3 V
VinCM Low (from V-)	3 V
Voh (from V+)	1.5 V
Vol (from V-)	1.5 V
Vos	0.2 mV
Vos TC	3 µV/C
Vs Max	36 V
Vs Min	5 V

Eco Plan

RoHS

Compliant

Design Notes

Download
Updated Operational Amplifier Selection Guide for Optimum Noise Performance &mdash DN140
PDF, 74 Kb, File published: Oct 1, 1996
Extract from the document
Operational Amplifier Selection Guide for
Optimum Noise Performance вЂ“ Design Note 140
Frank Cox
Eight years ago, George Erdi wrote a very useful Design
Note (DN6) that presented information to aid in the
selection of op amps for optimum noise performance,
in both graphical and tabular form. Design Note 140 is
an update of DN6. It covers new low noise op amps as
well as some high speed op amps. Although a great deal
has changed in eight years, especially in electronics,
noise is still a critical issue in op amp circuit design
and the LTВ®1028 is still the lowest noise op amp for
low source impedance applications.
The amount of noise an op amp circuit will produce
is determined by the device used, the total resistance
in the circuit, the bandwidth of the measurement, the
temperature of the circuit and the gain of the circuit. A
convenient п¬Ѓgure of merit for the noise performance
of an op amp is the spectral density or spot noise. This
is obtained by normalizing the measurement to a unit
of bandwidth. Here the unit is 1Hz and the noise is reported as вЂњnV/в€љHz.вЂќ The noise in a particular application
bandwidth can be calculated by multiplying the spot
noise by the square root of the application bandwidth. …
Download
Low Power, Fast Op Amps Have Low Distortion &mdash DN148
PDF, 74 Kb, File published: Feb 2, 1997
Extract from the document
Low Power, Fast Op Amps Have Low Distortion
Design Note 148
George Feliz
Introduction
The LTВ®1351/LT1352/LT1353 family of low power operational ampliп¬Ѓers combines a slew rate of 200V/Ојs with
a supply current of 250ОјA per ampliп¬Ѓer. Both input and
output stages have been optimized for linearity, achieving outstanding distortion performance with miserly
quiescent current. The ampliп¬Ѓer is available in single,
dual and quad versions, in various packages, including
the tiny MSOP package for the LT1351 single ampliп¬Ѓer.
A summary of key speciп¬Ѓcations is shown in Table 1. Table 1. Key Performance Features
of the LT1351/LT1352/LT1353
Power Supply Range + 0.01ОјF 7 0.1ОјF 4 вЂ“
5 10ОјF 1
2 вЂ“ 5V
Q1
2N3906 3
4
10k 5
6 вЂ“ 5V 7
8
9
10 …

Model Line

Series: LT1351 (5)

LT1351CMS8#PBF LT1351CMS8#TRPBF LT1351CN8#PBF LT1351CS8#PBF LT1351CS8#TRPBF

Manufacturer's Classification

Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > Low Power Amplifiers (Is < 1mA/amp) | High Voltage Amplifiers (>12V)

Other Names:

LT1351CS8TRPBF, LT1351CS8 TRPBF