Datasheet Linear Technology LT1632IN8#PBF

Manufacturer	Linear Technology
Series	LT1632
Part Number	LT1632IN8#PBF

45MHz, 45V/us, Dual Rail-to-Rail Input and Output Precision Op Amps

Datasheets

Preview and Download

PDF, 299 Kb, Language: en, File uploaded: Aug 6, 2017, Pages: 16
45MHz, 45V/µs, Quad Rail-to-Rail Input and Output Precision Op Amps

Extract from the document

Prices

Packaging

Package	N-8
Package Code	N
Package Index	05-08-1510 (N8)

Parametrics

Number of Channels	2
Unity Gain BW	45 MHz

Av Min Stable	1 V/V
Avol	66 dB
Common Mode Rejection Ratio	83 dB
Cload	10 pF
Design Tools	LTspice Model
Enoise 1/f Corner	7 Hz
Enoise Density	12 nV/rtHz
Export Control	no
Ibias	1150 nA
Inoise	1.6 pA/rtHz
Inoise 1/f Corner	16 Hz
Iout	40 mA
Isupply	4.3 mA
LF Enoise	0.4 µVPP
Operating Temperature Range	-40 to 85 °C
Over-the-Top	no
PSRR	100 dB
Rail-to-Rail	Both
Rail-to-Rail In	yes
Rail-to-Rail Out	yes
SR	27 V/µs
Shutdown	no
Single Supply	yes
Ts (0.1%)	400 ns
Type	VFB
Voh (from V+)	0.016 V
Vol (from V-)	0.015 V
Vos	0.4 mV
Vos TC	8 µV/C
Vs Max	36 V
Vs Min	2.6 V

Eco Plan

RoHS

Compliant

Other Options

LT1633 LT1633

Articles

Download
Low-Distortion Sine Wave Oscillator with Precise RMS Amplitude Stability &mdash LT Journal
PDF, 111 Kb, File published: Mar 25, 2005
Extract from the document
DESIGN IDEAS Low-Distortion Sine Wave Oscillator
with Precise RMS Amplitude Stability
by Cheng-Wei Pei
Many applications require a frequency
and/or amplitude-stable sine wave
as a reference for calibration or measurement. Low harmonic distortion is
also required for meaningful results
in applications such as LVDT signal
conditioning, ADC testing, and, of
course, harmonic distortion testing.
Many sine wave generation techniques simply cannot achieve the low
harmonic distortion and amplitude
stability required of a precision sine
wave reference. The technique shown
here generates a sine wave with less
than 0.003% distortion and 0.1%
amplitude stability.
Figure 1 shows a simple oscillator
circuit consisting of a Wien bridge
oscillator core and an amplitude
stabilization loop. The LT1632 highspeed low-distortion ampliп¬Ѓer and its
positive feedback RC network generate
the oscillations. The amplitude, and …
Download
Low Distortion Rail-to-Rail Op Amps Have 0.003% THD with 100kHz Signal &mdash LT Journal
PDF, 262 Kb, File published: May 1, 1998
Extract from the document
DESIGN FEATURES Low Distortion Rail-to-Rail Op Amps
Have 0.003% THD with 100kHz Signal
by Danh Tran
Introduction Device Characteristics The LT1630/LT1632 duals and
LT1631/LT1633 quads are the newest members of Linear TechnologyвЂ™s
family of rail-to-rail op amps, which
provide the best combination of AC
performance and DC precision over
the widest range of supply voltages.
The LT1630/LT1631 deliver a 30MHz
gain-bandwidth product, a 10V/Вµs
slew rate and 6nV/в€љHz input-voltage
noise. Optimized for higher speed
applications, the LT1632/LT1633
have a 45MHz gain-bandwidth product, a 45V/Вµs slew rate and 12nV/в€љHz
input voltage noise. In a low supply
environment, these op amps maximize system dynamic range and
precision. The very large open loop
gain of these devices (a few million)
virtually eliminates gain error.
Because input offset error is so important on low supplies, it is
guaranteed over the whole rail-to-rail
input range. To achieve this, these …

Model Line

Series: LT1632 (6)

LT1632CN8#PBF LT1632CS8#PBF LT1632CS8#TRPBF LT1632IN8#PBF LT1632IS8#PBF LT1632IS8#TRPBF

Manufacturer's Classification

Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > General Purpose Amplifiers | High Voltage Amplifiers (>12V) | Rail-to-Rail Amplifiers

Other Names:

LT1632IN8PBF, LT1632IN8 PBF