Datasheet Analog Devices 5962-8954401PA

REVISIONS
LTR DESCRIPTION A DATE (YR-MO-DA) APPROVED 01-02-23 R. MONNIN Drawing updated to reflect current requirements. -ro 05-12-20 R. MONNIN Update drawing as part of 5 year review. -jt 12-11-14 C. SAFFLE Delete the output short circuit current test as specified under table I. -ro B
C THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS REV C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 PMIC N/A PREPARED BY
RICK OFFICER STANDARD
MICROCIRCUIT
DRAWING DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil CHECKED BY
CHARLES E. BESORE
APPROVED BY THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE AMSC N/A MICHAEL A. FRYE
DRAWING APPROVAL DATE
89-08-15 REVISION LEVEL
C MICOCIRCUIT, LINEAR, LOW-POWER, HIGH
PRECISION OPERATIONAL AMPLIFIER, …

Low Power, High Precision
Operational Amplifier
OP97
Low supply current: 600 μA maximum
OP07 type performance
Offset voltage: 20 μV maximum
Offset voltage drift: 0.6 μV/°C maximum
Very low bias current
25°C: 100 pA maximum
−55°C to +125°C: 250 pA maximum
High common-mode rejection: 114 dB minimum
Extended industrial temperature range: −40°C to +85°C PIN CONNECTIONS
NULL 1 OP97 8 NULL –IN 2 7 V+ +IN 3 6 OUT V– 4 5 OVER
COMP 00299-001 FEATURES Figure 1. 8-Lead PDIP (P Suffix)
8-Lead SOIC (S Suffix) GENERAL DESCRIPTION
The OP97 is a low power alternative to the industry-standard
OP07 precision amplifier. The OP97 maintains the standards of
performance set by the OP07 while utilizing only 600 μA supply
current, less than 1/6 that of an OP07. Offset voltage is an ultralow
25 μV, and drift over temperature is below 0.6 μV/°C. External
offset trimming is not required in the majority of circuits. Common-mode rejection and power supply rejection are also
improved with the OP97, at 114 dB minimum over wider
ranges of common-mode or supply voltage. Outstanding PSR, a …

Low Power, High Precision
Operational Amplifier
OP97
Low supply current: 600 μA maximum
OP07 type performance
Offset voltage: 20 μV maximum
Offset voltage drift: 0.6 μV/°C maximum
Very low bias current
25°C: 100 pA maximum
−55°C to +125°C: 250 pA maximum
High common-mode rejection: 114 dB minimum
Extended industrial temperature range: −40°C to +85°C PIN CONNECTIONS
NULL 1 OP97 8 NULL –IN 2 7 V+ +IN 3 6 OUT V– 4 5 OVER
COMP 00299-001 FEATURES Figure 1. 8-Lead PDIP (P Suffix)
8-Lead SOIC (S Suffix) GENERAL DESCRIPTION
The OP97 is a low power alternative to the industry-standard
OP07 precision amplifier. The OP97 maintains the standards of
performance set by the OP07 while utilizing only 600 μA supply
current, less than 1/6 that of an OP07. Offset voltage is an ultralow
25 μV, and drift over temperature is below 0.6 μV/°C. External
offset trimming is not required in the majority of circuits. Common-mode rejection and power supply rejection are also
improved with the OP97, at 114 dB minimum over wider
ranges of common-mode or supply voltage. Outstanding PSR, a …