Datasheet Linear Technology LTC1415IG#TRPBF

Datasheets

Prices

Packaging

Parametrics

Eco Plan

Design Notes

• Download
  1.25Msps, 12-Bit ADC Conserves Power and Signal Integrity on a Single 5V Supply &mdash DN146
  PDF, 80 Kb, File published: Jan 2, 1997
  Extract from the document

  1.25Msps, 12-Bit ADC Conserves Power and
  Signal Integrity on a Single 5V Supply – Design Note 146
  Kevin R. Hoskins
  INTRODUCTION Complete ADC with Reference and Wideband S/H
  The LTC1415 includes a 10ppm/В°C 2.5V reference that
  is suitable for use as a system reference. This internal
  reference sets the LTC1415’s full-scale input range from
  0V to 4.096V. The circuit in Figure 2 trims the full-scale
  (gain) error without placing additional circuitry in the
  signal path. The new LTC®1415 expands LTC’s family of high speed,
  low power 12-bit ADCs. Operating on a single 5V supply,
  it is optimized for applications such as ADSL, HDSL,
  modems, direct down-conversion, CCD imaging,
  DSP-based vibration analysis, waveform digitizers and
  multiplexed systems. The LTC1415’s block diagram is
  shown in Figure 1. The LTC1415’s fully differential S/H has a typical 20MHz
  input bandwidth and very good CMRR of 60dB or better over a DC to 10MHz bandwidth. AC specifications
  are measured with single-ended (–A IN grounded)
  signal drive. Offsetting –AIN above ground eases the
  drive requirements of rail-to-rail op amps that drive the
  LTC1415’s input. Single 5V Supply, High Speed, Lowest Power
  The new LTC1415 has lower power dissipation and better performance and features than other 12-bit ADCs
  currently on the market. It samples at 1.25Msps and …

Model Line

Manufacturer's Classification

• Data Conversion > Analog-to-Digital Converters (ADC) > Precision ADCs (Fs < 10Msps) > Single Channel ADCs

Other Names:

LTC1415IGTRPBF, LTC1415IG TRPBF