Datasheet Linear Technology LTM4620IV#PBF

Datasheets

Prices

Packaging

Parametrics

Eco Plan

Design Notes

• Download
  Powering Altera Arria 10 FPGA and Arria 10 SoC: Tested and Verified Power Management Solutions &mdash DN549
  PDF, 1.6 Mb, File published: Feb 19, 2016
  Extract from the document

  Powering Altera ArriaВ 10 FPGA andВ Arria 10 SoC: Tested
  and Verified Power Management Solutions
  Design Note 549
  Afshin Odabaee
  Introduction
  FPGA development kits allow system developers to
  evaluate an FPGA without having to design a complete
  system. Figures 1 and 2 show Altera’s new 20nm
  Arria 10 FPGAs and Arria 10В SoCs (System-on-Chip)
  development boards. These boards are tested and
  verified by Altera, exemplifying best design practices
  in layout, signal integrity and power management.
  Power Management for Core, System and I/O
  The power management solution for high end FPGAs,
  including the Arria 10, should be carefully selected.
  A well thought-out power management design can
  reduce PCB size, weight and complexity, as well as
  lower power consumption and cooling costs. And it
  is essential to achieve optimal system performance.
  ForВ example, the 0.95V at 105A supplied by the 12V
  DC/DC regulator powering the core of the Arria 10 GX
  FPGA in Figure 1 has several features that complement
  the power saving schemes of the SoC: Figure 1. Arria 10 GX FPGA Development Kit …

Articles

• Download
  Avoid Debugging Cycles in Power Management for FPGA, GPU and ASIC Systems &mdash LT Journal
  PDF, 3.2 Mb, File published: Aug 25, 2016
  Extract from the document

  Avoid Debugging Cycles in Power Management for FPGA,
  GPU and ASIC Systems
  Afshin Odabaee When it comes to designing FPGA, GPU or ASIC controlled systems, the number of
  design challenges related to power management and analog systems pale in comparison
  to those related to digital design. Nevertheless, it is risky to assume that power system
  design can be left to “later,” or taken in line with digital design. Even seemingly innocuous
  problems in power supply design can significantly delay the release of a system, as any
  added time to the power system debugging cycle can halt all work on the digital side.
  A good way to put DC/DC regulation
  issues to rest is to use a verified development kit offered by the FPGA, GPU or
  ASIC vendor. Often, the design itself or
  a similar design is available as a board/
  kit by the suppliers of power products
  and FPGA, GPU and ASIC manufacturers. Using a tested and verified kit unburdens
  system designers of most power system
  and analog issues, allowing them instead
  to focus their energies on configuring the
  complex digital systems. The optimum
  power system layout is taken care of
  before significant design is undertaken. THOUGHTFUL POWER MANAGEMENT
  IS CHALLENGING AT THE START Every design task is initially daunting,
  and power management design is no
  exception. This is the case when power is …

• Download
  Real Power Density: 26A µModule Regulator Keeps Cool in Tight Spaces &mdash LT Journal
  PDF, 6.8 Mb, File published: Oct 18, 2012
  Extract from the document

  October 2012 I N T H I S I S S U E 1A, low noise buck-boost
  converter with 1.8V–5.5V
  input voltage range 9 surge stopper with ideal
  diode protects input and
  output 12 digital power system
  management with analog
  control loop for В±0.5% VOUT
  accuracy 17 LED PWM dimming
  simplified 34 Volume 22 Number 3 Real Power Density:
  26A ВµModule Regulator
  Keeps Cool in Tight Spaces
  Eddie Beville Each generation of high end processors, FPGAs and ASICs
  demands more power, but even as power supplies are expected to
  carry significantly heavier loads, they are given less board space to
  do so. It is now common for POL (point-of-load) supplies to produce
  multiple voltage rails at tens of amps to over a hundred amps at low,
  ≤1V, output voltages, and in less space than the generation before.
  Supplies that must support high load currents and fit in
  tight spaces are often judged primarily on their power
  density, or watts/cm2. Indeed, many of the latest packaged power supplies and discrete solutions proclaim
  impressively high power densities—power supply manufacturers seem to be able to squeeze more and more
  power from smaller packages. Unfortunately, there is a
  big problem lurking behind amazing increases in power …

Model Line

Manufacturer's Classification

• Power Management > Switching Regulator > Step-Down (Buck) Regulators > Multiple Output Buck
• µModule Solutions > µModule Regulators > µModule Buck Regulators | Extended Temperature (H & MP) µModule Regulators

Other Names:

LTM4620IVPBF, LTM4620IV PBF