Datasheet Microchip DSPIC33FJ256MC710AT-H/PT

dsPIC33FJXXXMCX06A/X08A/X10A
16-bit Digital Signal Controllers (up to 256 KB Flash and
30 KB SRAM) with Motor Control and Advanced Analog
Operating Conditions Timers/Output Compare/Input Capture 3.0V to 3.6V, -40ВєC to +150ВєC, DC to 20 MIPS 3.0V to 3.6V, -40ВєC to +125ВєC, DC to 40 MIPS Up to nine 16-bit timers/counters. Can pair up to
make four 32-bit timers. Eight Output Compare modules configurable as
timers/counters Eight Input Capture modules Core: 16-bit dsPIC33F CPU Code-efficient (C and Assembly) architecture
Two 40-bit wide accumulators
Single-cycle (MAC/MPY) with dual data fetch
Single-cycle mixed-sign MUL plus hardware
divide Communication Interfaces Two UART modules (10 Mbps)
-With support for LIN 2.0 protocols and IrDAВ® Two 4-wire SPI modules (15 Mbps) Up to two I2Cв„ў modules (up to 1 Mbaud) with
SMBus support Up to two Enhanced CAN (ECAN) modules
(1 Mbaud) with 2.0B support Quadrature Encoder Interface (QEI) module Data Converter Interface (DCI) module with I2S
codec support Clock Management В±2% internal oscillator
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast wake-up and start-up Power Management Input/Output Low-power management modes (Sleep, Idle,
Doze) Integrated Power-on Reset and Brown-out Reset 1.35 mA/MHz dynamic current (typical) 55 ОјA IPD current (typical) Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for nonstandard VOH1 5V-tolerant pins Selectable open drain, pull-ups, and pull-downs Up to 5 mA overvoltage clamp current External interrupts on all I/O pins Motor Control PWM Up to four PWM generators with eight outputs
Dead Time for rising and falling edges
12.5 ns PWM resolution
PWM support for Motor Control: BLDC, PMSM, ACIM,
and SRM Programmable Fault inputs Flexible trigger for ADC conversions and configurations Qualification and Class B Support AEC-Q100 REVG (Grade 1 -40ВєC to +125ВєC) AEC-Q100 REVG (Grade 0 -40ВєC to +150ВєC) Class B Safety Library, IEC 60730 Debugger Development Support Advanced Analog Features Two ADC modules: …