DATASHEET
ISL15102 FN8823
Rev.0.00
Dec 1, 2017 Single Port, PLC Differential Line Driver Features The ISL15102 is a single port differential line driver
developed for Power Line Communication (PLC)
applications. The device is designed to drive heavy line
loads while maintaining a high level of linearity required
in Orthogonal Frequency Division Multiplexing (OFDM)
PLC modem links. Single differential driver Internal VCM 90MHz signal bandwidth 900V/Вµs slew rate The ISL15102 has a disable control pin (DIS). In Disable
mode, the line driver goes in to Low Power mode and the
outputs maintain a high impedance in the presence of
high receive signal amplitude, improving TDM receive
signal integrity. Single +8V to +28V supply, absolute maximum 30V Supports narrowband and broadband DMT PLC -86dB THD at 200kHz in to 50О© line load -70dB THD at 3MHz in to 50О© line load The ISL15102 has built-in thermal protection. When the
internal temperature reaches +150В°C (typical) the driver
shuts down to prevent damage to the device. Control pin for enable/disable for TDM operation Thermal shutdown An internal input CM buffer maximizes the dynamic
range and reduces the number of external components in
the application circuit. Applications Power line communication differential driver The ISL15102 is supplied in a thermally-enhanced small
footprint (4mm x 5mm) 24 Ld QFN package. The
ISL15102 is specified for operation across the -40В°C to
+85В°C operating ambient temperature range. Table 1. Alternate Solutions
Part # Nominal В±VS
(V) Bandwidth
(MHz) Applications ISL15100 В±6, +12 180 Broadband PLC Related Literature ISL1571 В±6, +12 250 Broadband PLC For a full list of related documents, visit our website ISL15110 В±6, +12 120 MIMO PLC ISL15102 product page …
