Datasheet Microchip MIC2537-1YM-TR

MIC2537 Micrel MIC2537
Quad Power Distribution Switch
Final Information General Description Features The MIC2537 is a cost-effective high-side power switch with
four independently controlled channels, optimized for buspowered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements.
The MIC2537 satisfies the following USB requirements: each
switch channel supplies up to 100mA as required by USB
bus-powered downstream devices; fault current is limited to
typically 250mA, well below the UL 25VA safety requirements; and a flag output is available to indicate fault conditions to the local USB controller. Soft start eliminates the
momentary voltage drop on the upstream port that may occur
when the switch is enabled in bus-powered applications. Additional features include thermal shutdown to prevent
catastrophic switch failure from high-current loads and 3.3V
and 5V logic compatible enable inputs.
The MIC2537 is available in active-high and active-low versions in a 16-lead SOP package. Compliant to USB specifications
3V to 5.5V input
100mA minimum continuous load current per port
425mΩ typical on-resistance
< 400mA current limit
Individual open-drain fault flag leads
3V/5V-compatible enable inputs
Active-high (-1) and active-low (-2) versions
100ВµA max. on-state supply current
<1ВµA typical off-state supply current
16-lead SOP package …