MIC94044/5
28mΩ RDSON 3A High Side Load Switch
in 1.2mm x 1.2mm MLFВ® Package General Description Features The MIC94044 and MIC94045 are high-side load switches
designed to operate from 1.7V to 5.5V input voltage. The
load switch pass element is an internal 28mΩ RDSON
P-channel MOSFET which enables the device to support
up to 3A of continuous current. Additionally, the load
switch supports 1.5V logic level control and shutdown
features in a tiny 1.2mm x 1.2mm 4 pin MLFВ® package.
The MIC94044/5 provides a slew rate controlled soft-start
turn-on of 1ms (typical) to prevent an in-rush current event
from pulling down the input supply voltage.
The MIC94045 features an active load discharge circuit
which switches in a 200Ω load when the switch is disabled
to automatically discharge a capacitive load.
Internal level shift circuitry allows low voltage logic signals
to switch higher supply voltages. The enable voltage can
be as high as 5.5V and is not limited by the input voltage.
The MIC94044/5 operating voltage range makes them
ideal for Lithium ion and NiMH/NiCad/Alkaline battery
powered systems, as well as non-battery powered
applications. The devices provide low quiescent current
and low shutdown current to maximize battery life. …
