EQCO30T5.2
EQCO30T5.2 3G/HD-SDI Video Cable Driver
Features Introduction Compatible with all SMPTE3G SDI Data Rates:
-SMPTE259M SDI, 143 to 360 Mbps
-SMPTE344M, 540 Mbps
-SMPTE292M HD-SDI, 1.485 Gbps
-SMPTE372M Dual-Link HD-SDI, 2.97 Gbps
-SMPTE424M Dual-Speed 3G-SDI, 2.97 Gbps Pin Compatible with Gennum and National
Semiconductor Parts Loss of Signal Detect at Input, Optional 3 dB Input
Trace/Receive Equalization Also Operates with 8B/10B Coding Single 3.3V Supply. Low Power Consumption (150 mW, 3.3V supply) Output Driver Enable LF-Uplink Receiver Included, Receiving 5 Mbps in
Full-Duplex Communication for Cable Lengths in
0-450m Range Up to 900 mA can be Received for Powering
Camera Devices Selectable Slew Rate for SD and HD/3G 16-Pin, 0.65 mm Pin Pitch, 4 mm QFN Package -40В°C to +85В°C Industrial Temperature Range Pb-Free and RoHS Compliant The EQCO30T5 is a video cable driver for 3G/HD/SDI
video, with speeds up to 4.0 Gbps. It is designed to be
a direct replacement for competing cable drivers. In
addition to downlink functionality from camera to frame
grabber, it can also receive a 5 Mbps uplink signal from
the frame grabber to the camera. Additionally, power
can be provided over the same cable using the same
chip and a few external components. The device
operates with 8B/10B coded signals and with SMPTE
signals up to 2.97 Gbps. Applications High Definition, High Frame Rate Pro-Video
HD-SDI Frame Store Surveillance, Industrial/Inspection, Medical Video …
