Datasheet Texas Instruments INA132UA
| Manufacturer | Texas Instruments |
| Series | INA132 |
| Part Number | INA132UA |
Low Power, Single-Supply Difference Amplifier 8-SOIC -40 to 85
Datasheets
Low Power, Single-Supply Difference Amplifier datasheet
PDF, 333 Kb, File published: Sep 27, 2000
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 | 8 | 8 |
| Package Type | D | D | D |
| Industry STD Term | SOIC | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 75 | 75 | 75 |
| Carrier | TUBE | TUBE | TUBE |
| Device Marking | 132U | INA | A |
| Width (mm) | 3.91 | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 |
| Mechanical Data | Download | Download | Download |
Parametrics
| CMRR(Min) | 76 dB |
| Common Mode Input High(Max) | 28 V |
| Common Mode Input High(Min) | 28 V |
| Common Mode Input Low(Min) | -15 V |
| Gain | 1 V/V |
| Gain Drift(Max) | 1 ppm/C |
| Gain Error (+/-)(Max) | 0.075 % |
| Gain(Max) | 1 V/V |
| Gain(Min) | 1 V/V |
| Input Offset (+/-)(Max) | 250 uV |
| Iq(Typ) | 0.16 mA |
| Number of Channels | 1 |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rating | Catalog |
| Slew Rate(Typ) | 0.1 V/us |
| Small Signal Bandwidth(Typ) | 0.3 MHz |
| Vs(Max) | 36 V |
| Vs(Min) | 2.7 V |
Eco Plan
| RoHS | Compliant |
Application Notes
- High-Voltage Signal Conditioning for Low Voltage ADCsPDF, 135 Kb, File published: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented: - Precision Absolute Value CircuitsPDF, 100 Kb, File published: Oct 2, 2000
You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a
Model Line
Series: INA132 (11)
Manufacturer's Classification
- Semiconductors > Amplifiers > Difference Amplifiers
