Datasheet Texas Instruments MSP432P4011IRGCT
| Manufacturer | Texas Instruments |
| Series | MSP432P4011 |
| Part Number | MSP432P4011IRGCT |
SimpleLink Mixed-Signal Microcontroller 64-VQFN -40 to 85
Datasheets
MSP432P411x, MSP432P401x SimpleLink Mixed-Signal Microcontrollers datasheet
PDF, 3.5 Mb, Revision: A, File published: Feb 2, 2018
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 64 |
| Package Type | RGC |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Width (mm) | 9 |
| Length (mm) | 9 |
| Thickness (mm) | 0.88 |
| Pitch (mm) | 0.5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| ADC Channels | 12 |
| ADC Resolution | 14 Bits |
| ADC Sampling Rate | 1 MSPS |
| Active Power | 100 uA/MHz |
| CAN | N/A |
| Comparators | 2 |
| DMA | 8 |
| Device Type | SimpleLink Host MCU |
| Ethernet | N/A |
| Flash | 2048 KB |
| Frequency | 48 MHz |
| GPIO | 48 |
| I2C | 3 |
| LCD | N/A |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VQFN |
| RAM | 256 |
| RX Current (Lowest) | N/A mA |
| SPI | 6 |
| Security Enabler | Cryptographic acceleration,Debug security,Device identity,Secure FW and SW update,Software IP protection |
| Serial I/O | 6 |
| Standby Current | 0.82 uA |
| Technology | Host MCUs |
| Throughput(Max) | N/A Mbps |
| Timers | 5 |
| UART | 3 |
| USB | N/A |
| Vcc range | 1.62,3.7 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: MSP-TS432PZ100
100-pin Target Development Board for SimpleLink™ MSP432P4x MCUs (microcontroller not included)
Lifecycle Status: Active (Recommended for new designs) - Development Kits: LAUNCHXL-CC2640R2
SimpleLink™ Bluetooth® low energy CC2640R2F wireless MCU LaunchPad™ development kit
Lifecycle Status: Active (Recommended for new designs) - Development Kits: CC3120BOOST
SimpleLink™ Wi-Fi® CC3120 Wireless Network Processor BoosterPack™ Plug-In Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LAUNCHXL-CC1310
SimpleLink Sub-1 GHz CC1310 wireless MCU LaunchPad development kit
Lifecycle Status: Active (Recommended for new designs) - Debug Probes/Analyzers: TMDSEMU110-U
XDS110 JTAG Debug Probe
Lifecycle Status: Active (Recommended for new designs) - Debug Probes/Analyzers: MSP432-DEBUGGERS
Debuggers for MSP432
Lifecycle Status: Active (Recommended for new designs) - Development Kits: MSP-EXP432P4111
SimpleLink MSP432P4111 MCU LaunchPad Development Kit
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- SimpleLink MSP432P4 - Smart Metering HostPDF, 125 Kb, File published: Feb 20, 2018
- SimpleLink MSP432P4 - Low-Power 2MB MCUPDF, 64 Kb, File published: Feb 12, 2018
- Designing an Ultra-Low-Power (ULP) Application With SimpleLink MSP432 MCUs (Rev. A)PDF, 487 Kb, Revision: A, File published: Mar 7, 2017
With the growing system complexity in ultra-low-power microcontroller (MCU) applications minimizing the overall energy consumption is one of the most difficult problems to solve. Multiple aspects including silicon other onboard hardware components and application software must be considered. There are some obvious generic techniques that can be used to reduce energy consumption such as reducing - Low-Power Analog Measurements With SimpleLink MSP432 Microcontollers (Rev. A)PDF, 538 Kb, Revision: A, File published: Oct 19, 2017
Ultra-low-power analog measurements are a common requirement in applications such as non-contact power measurement and wireless condition monitoring. Many of these systems are battery based and must achieve extended life while still providing continuous coverage. This application note describes how to utilize the low-power features of the analog-to-digital converter (ADC) with up to 16-bit precisi - Precision ADC With 16-Bit PerformancePDF, 681 Kb, File published: Jan 11, 2018
- Scaling Across the SimpleLink MSP432P4 MCU FamilyPDF, 385 Kb, File published: Jan 12, 2018
- Leveraging Precision ADC on SimpleLink MSP432 MCUs for Predictive Maintenance (Rev. A)PDF, 506 Kb, Revision: A, File published: Sep 18, 2017
This application report describes a high-performance method for predictive maintenance of motors by monitoring their frequency response with the SimpleLink MSP432P401R microcontroller using precision ADC with up to 16-bit ENOB and FFT analysis. - Migrating to the SimpleLink MSP432 Family (Rev. D)PDF, 366 Kb, Revision: D, File published: Oct 19, 2017
The 16-bit MSP430 and the 32-bit SimpleLink MSP432 microcontroller (MCU) families complement each other in low-power and performance. The goal of this migration guide is to help developers accurately assess the effort to migrate an existing application from the 16-bit MSP430 to the 32-bit SimpleLink MSP432 Arm platform if they so choose to. Ultimately the migration guide is built to help derive a
Model Line
Series: MSP432P4011 (2)
- MSP432P4011IRGCR MSP432P4011IRGCT
Manufacturer's Classification
- Semiconductors > Microcontrollers (MCU) > SimpleLink MCUs > SimpleLink Wired MCUs
