ESP32-H2-WROOM-07
Datasheet Version 1.0 Bluetooth® Low Energy and IEEE 802.15.4 module
Built around ESP32-H2 series of SoCs, RISC-V single-core 32-bit microprocessor
2 MB or 4 MB flash in chip package
3 GPIOs
Monopole antenna ESP32-H2-WROOM-07 www.espressif.com 1 Module Overview 1 Module Overview
Note:
Check the link or the QR code to make sure that you use the latest version of this document:
https://espressif.com/sites/default/files/documentation/esp32-h2-wroom-07_datasheet_en.pdf 1.1 Features
• Supports 250 Kbps data rate in 2.4 GHz band CPU and On-Chip Memory and OQPSK PHY
• ESP32-H2 embedded, RISC-V single-core • Supports Thread 1.3 32-bit microprocessor, up to 96 MHz • Supports Zigbee 3.0 • 128 KB ROM • Supports Matter • 320 KB SRAM • Supports other application-layer protocols • 4 KB LP Memory (HomeKit, MQTT, etc) • 2 MB or 4 MB in-package flash Peripherals
• 3 GPIOs Bluetooth – 3 strapping pins • Bluetooth Low Energy (Bluetooth 5.3 certified) • I2C, I2S, SPI, UART, ADC, LED PWM, ETM, • Bluetooth mesh GDMA, PCNT, PARLIO, RMT, TWAI® , MCPWM, • Bluetooth Low Energy long range (Coded PHY, USB Serial/JTAG, temperature sensor, 125 Kbps and 500 Kbps) general-purpose timers, system timer,
watchdog timer • Bluetooth Low Energy high speed (2 Mbps)
• Bluetooth Low Energy advertising extensions Integrated Components on Module and multiple advertising sets • 32 MHz crystal oscillator • Simultaneous operation of Broadcaster,
Observer, Central, and Peripheral devices Antenna Options • Multiple connections • Monopole antenna • LE power control Operating Conditions
IEEE 802.15.4 • Operating voltage/Power supply: 3.0∼3.6 V • IEEE Standard 802.15.4-2015 compliant Espressif Systems • Operating ambient temperature: –40∼105 °C 2 ESP32-H2-WROOM-07 Datasheet v1.0 1 Module Overview 1.2 Series Comparison ESP32-H2-WROOM-07 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that
has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenarios related
to Internet of Things (IoT), such as embedded systems, smart home, wearable electronics, etc.
ESP32-H2-WROOM-07 can be vertically soldered to a PCB board via wave soldering. The module has 3
available GPIOs.
ESP32-H2-WROOM-07 can be connected to an external monopole antenna.
The series comparison for ESP32-H2-WROOM-07 is as follows:
Table 1: ESP32-H2-WROOM-07 Series Comparison …
