Datasheet LPC2105BBD48.151 - NXP 32 bit MCU 128K FLASH, SMD, 2105

NXP LPC2105BBD48.151

Part Number: LPC2105BBD48.151

Detailed Description

Manufacturer: NXP

Description: 32 bit MCU 128K FLASH, SMD, 2105

Docket:
LPC2104/2105/2106
Single-chip 32-bit microcontrollers; 128 kB ISP/IAP Flash with 64 kB/32 kB/16 kB RAM
Rev.

04 -- 05 February 2004 Product data
1. General description
The LPC2104, 2105 and 2106 are based on a 16/32 bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kbytes (kB) of embedded high speed flash memory. A 128 bit wide memory interface and a unique accelerator architecture enable 32 bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty. Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kilobytes, they are very well suited for communication gateways and protocol converters, soft modems, voice recogn

Specifications:

Base Number: LPC2105
Clock Frequency: 60 MHz
IC Generic Number: 2105
Logic Function Number: 2105
Memory Size: 128 Kb
Memory Type: Flash
Microprocessor/Controller Features: 16/32 bit ARM7TDMI-S processor, 16/32/64 Kb on-chip Static RAM, 128 Kb on-chip Flash Program Memory, In-System Programming (ISP) and In-Application Programming (IAP), Vectored Interrupt Controller, EmbeddedICE-RT interface, Embedded Trace Macrocell
Number of Bits: 32
Number of I/O Lines: 32
Number of Pins: 48
Number of Timers: 4
Number of bits In Timer: 32
Operating Temperature Range: 0°C to +70°C
Oscillator Type: On-chip crystal
Package / Case: LQFP
RAM Size: 32 Kb
SVHC: No SVHC (18-Jun-2010)
Serial Comms: IВІC, SPI, 2x UART
Termination Type: SMD
Voltage Vcc: 3.6 V

Accessories:

Dataman - DATAMAN 848PRO