Datasheet LPC2378FBD144 - NXP MCU 32 bit ARM7, 10/100, USB, CAN

NXP LPC2378FBD144

Part Number: LPC2378FBD144

Detailed Description

Manufacturer: NXP

Description: MCU 32 bit ARM7, 10/100, USB, CAN

Docket:
LPC2377/78
Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC
Rev.

5 -- 17 June 2010 Product data sheet
1. General description
The LPC2377/78 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The LPC2377/78 are ideal for multi-purpose serial communication applications. It incorporates a 10/100 Ethernet Media Access Controller (MAC), USB full speed device with 4 kB of endpoint RAM (LPC2378 only), four UARTs, two CAN channe

Specifications:

CPU Speed: 72 MHz
Clock Frequency: 72 MHz
Core Size: 32 bit
Flash Memory Size: 512 Kb
Interface: CAN, I2C, SPI, UART
Logic Function Number: 2378
Number of ADC Inputs: 8
Number of I/O Lines: 104
Number of PWM Channels: 6
Number of Pins: 144
Number of Timers: 4
Operating Temperature Range: -40°C to +85°C
Oscillator Type: External, Internal
Package / Case: LQFP
Peripherals: ADC, DAC, DMA, RTC
Program Memory Size: 512 Kb
RAM Size: 58 Kb
SVHC: No SVHC (18-Jun-2010)
Supply Voltage Range: 3 V to 3.6 V
Termination Type: SMD

RoHS: Yes

Accessories:

Dataman - DATAMAN 848PRO