HMC549MS8GE v04.0120 DUAL OUTPUT LOW NOISEAMPLIFIER, 0.04 - 0.96 GHzEvaluation PCB T M E - S IS O W N O S - L R IE LIF P M A List of Materials for Evaluation PCB 109236 [1] The circuit board used in the application should use Item Description RF circuit design techniques. Signal lines should J1, J2 BOMAR F Type 75 Ohm Connectors have 75 Ohm impedance while the package ground J3, J4 DC Pin leads and exposed paddle should be connected C1, C2 18 kpF Capacitor, 0402 Pkg. directly to the ground plane similar to that shown. C3 150 pF Capacitor, 0402 Pkg. A sufficient number of via holes should be used to C4 390 pF Capacitor, 0603 Pkg. connect the top and bottom ground planes. The C5 4.7 µF Capacitor, Tantalum evaluation circuit board shown is available from C6 1,000 pF Capacitor, 0402 Pkg. Analog Devices, upon request. C7, C8 120 pF Capacitor, 0402 Pkg. L1, L2 560 nH Inductor, 0603 Pkg.. R1, R2 0 Ohm Resistor, 0603 Pkg. U1 HMC549MS8GE Low Noise Amplifier U2 ETC1-1-13 l:l Balun PCB [2] 109234 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: FR4 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 7 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D