Evaluation Kit Atmel AT32UC3L0-XPLD
MCU board for AVR UC3L.
Detailed Description
It features an AT32UC3L064 and additional components demonstrating the features of the device.
The UC3-L0 Xplained features the AT32UC3L064, which is a picoPower device optimized for low power control applications. The AVR device offers ultra low power consumption, 64 KB of Flash and 16 KB of SRAM, and a rich selection of communication ports. The UC3L0 Xplained kit features four LEDs + one RGB LED, QTouch slider and button, NTC temperature sensor and analog filter, and 4 I/O expansion ports. Because the UC3L064 does not offer a USB port, the kit also features an external USB to UART/I2C bridge (AT32UC3B1256). The kit can be programmed and debugged using any AVR debugger, including the JTAGICE mkII and AVR ONE.
Features
- Atmel AT32UC3L064 microcontroller
- Atmel AT32UC3B1256
- Board controller
- Communication gateway
- Analog input (to ADC)
- Temperature sensor
- RC filter
- Digital I/O
- One mechanical button switch
- Three LEDs
- Four expansion headers
- Footprints for external memory
- Atmel AT45DB series DataFlash serial flash
- Atmel AT25DF series industry standard serial flash
- Touch
- One Atmel QMatrix slider (alt. four QMatrix buttons)
- One Atmel QTouch button
The Atmel AT32UC3L064 and the Atmel AT32UC3B1256 that come with the Atmel UC3-L0 Xplained kit are both preprogrammed.
The preprogrammed firmware in the AT32UC3L064 is set up with a small demo with the QMatrix touch slider and QTouch button that can be used to control the RGB LED. The device also features a UART boot loader that can be used to program new firmware to the device. Hold the mechanical button while applying power to start the boot loader. The boot loader can be used with the command line tool “batchISP” delivered with FLIP.
The preprogrammed AT32UC3B1256 firmware offers features such as a boot loader for self-programming of the board controller itself and a UART-to-USB gateway.
Other Names:
AT32UC3L0XPLD, AT32UC3L0 XPLD
