Plug-in-Module Microchip MA330029
dsPIC33F 28P QFN to 100P Plug-In-Module
Detailed Description
This PIM comes with a 28-pin dsPIC33FJ16GP102 QFN device.
Use with the Explorer 16 Development Board(DM240001 or DM240002)
The dsPIC33FJ16GP102 plug-in module (PIM) (Part No. DM330029) is designed to demonstrate the capabilities of the dsPIC33FJ16GP102 family of general purpose devices using the Explorer 16 Development Board and the PICtail Plus daughter boards.
The dsPIC33FJ16GP102 device is a high-performance 16-bit digital signal controller within a small 28-pin 6x6 mm QFN package.The dsPIC33FJ16GP102 device is equipped with Peripheral Pin Select (PPS), which allows many of the
digital peripherals to be remapped to use any number of pins on the device.
The PIM takes advantage of PPS by using zero ohm resistors to connect the I/O to the 100-pin Explorer 16 Development Board. Simply removing the zero ohm resistors and using the test points associated with each I/O pin (i.e., RP0, RP1, etc.), allows the designer to reroute the pin to any of the available pins on the Explorer 16 Development Board. This capability enables easier and faster design times.
