Plug-in module Microhip MA330028

Detailed Description

dsPIC33EP64MC504 Features:

• Operating Conditions
  • 3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
  • 3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS
• Core: 16-bit dsPIC33E/PIC24E CPU
  • Code-efficient (C and Assembly) architecture
  • Two 40-bit wide accumulators
  • Single-cycle (MAC/MPY) with dual data fetch
  • Single-cycle mixed-sign MUL plus hardware divide
  • 32-bit multiply support
• High-Speed PWM
  • Up to three PWM pairs with independent timing
  • Dead time for rising and falling edges
  • 7.14 ns PWM resolution
  • PWM support for:
    • DC/DC, AC/DC, Inverters, PFC, Lighting
    • BLDC, PMSM, ACIM, SRM
  • Programmable Fault inputs
  • Flexible trigger configurations for ADC conversions
• Advanced Analog Features
  • ADC module:
    • Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
    • Six analog inputs on 28-pin devices and up to 16analog inputs on 64-pin devices
  • Flexible and independent ADC trigger sources
  • Up to three Op amp/Comparators with direct connection to the ADC module:
    • Additional dedicated comparator
    • Programmable references with 32 voltage points
  • Charge Time Measurement Unit (CTMU):
    • Supports mTouch capacitive touch sensing
    • Provides high-resolution time measurement (1 ns)
    • On-chip temperature measurement
• Timers/Output Compare/Input Capture
  • 12 general purpose timers:
    • Five 16-bit and up to two 32-bit timers/counters
    • Four OC modules configurable as timers/counters
    • PTG module with two configurable timers/counters
    • 32-bit Quadrature Encoder Interface (QEI) module configurable as a timer/counter
  • Four IC modules
  • Peripheral Pin Select (PPS) to allow function remap
  • Peripheral Trigger Generator (PTG) for scheduling complex sequences
• Communication Interfaces
  • Two UART modules (17.5 Mbps) With support for LIN 2.0 protocols and IrDA
  • Two 4-wire SPI modules (15 Mbps)
  • ECAN module (1 Mbaud) CAN 2.0B support
  • wo I2C modules (up to 1 Mbaud) with SMBus support
  • PPS to allow function remap
  • Programmable Cyclic Redundancy Check (CRC)
• Direct Memory Access (DMA)
  • 4-channel DMA with user-selectable priority arbitration
  • UART, SPI, ADC, ECAN, IC, OC, and Timers
• Input/Output
  • Sink/Source 15 mA or 10 mA, pin-specific for standard VOH/VOL, up to 22 or 14 mA, respectively for non-standard VOH1
  • 5V-tolerant pins
  • Selectable open drain, pull-ups, and pull-downs
  • Up to 5 mA overvoltage clamp current
  • External interrupts on all I/O pins

microchip.com