Development Kit Texas Instruments DRV8301-LS12-KIT
The DRV8301-LS12-KIT is a motor control evaluation kit for spinning three phase brushless DC and brushless AC (BLAC) - often referred to as permanent magnet synchronous (PMSM) – motors with examples of both sensorless Field Oriented / Vector Control (FOC) and TI’s InstaSPIN-BLDC sensorless BLDC solution.
Detailed Description
The DRV8301-LS12-KIT is a high-performance, power-efficient, cost-effective platform that speeds development for quicker time to market. Applications include Electric Power Steering, Power Doors/Roofs, EV/HEV/Train Propulsion, Dual Clutch Transmissions, Electronic Throttle Control, Fuel/Coolant/Oil pumps, A/C Compressor, and Wipers.
Features
- Software Support:
- Encoder based FOC with redundant sensorless speed estimation
- Sensorless InstaSPIN™-BLDC
- Speed & torque control loops
- Follows TI motor software & HALCoGen conventions
- Leverages ARM CMSIS Math Library
- Teknic Motor:
- 6,000 rpm
- 7.1 A motor with built in encoder
- Hercules controlCARD Features:
- A Texas Instruments TMS570LS1227 337-ball BGA microcontroller
- On board TPS65381 Safety Power Management Companion
- On board USB XDS100v2 JTAG emulator with isolation
- 10/100 Mbps Ethernet interface via RJ-45 with same PHY as on the TMDX570LS12HDK
- Hardware option for routing the N2HET or eTimers to the DIMM interface
- Isolated UART/SCI accessible through a USB Virtual Port (VCP)
- LPO_TEST push button switch (causes CLKDET hardware fault on MCU)
- LED indicators for xds100 power, activity, target/MCU power, HET pin activity, Ethernet link and activity, Ethernet speed, nERROR and ENDRV.
- Reset pushbuttons for IGN cycle (PORRST) and nRST
- 5V ADC input configuration
- DRV8301 EVM:
- 1.7A Pre-driver with 2x internal programmable gain amplifiers for shunt current sensing
- 1.5A buck converter & 60A+ FETs
What's Included
- DRV8301 EVM
- Teknic Motor with built-in Encoder and wire harness
- 24 V international wall power supply
- Hercules TMS570LS12 Isolated controlCARD
- USB Cable
- Quick Start Guide
- One DVD that includes TI Code Composer Studio 5
- One DVD that includes: TI MotorWare motor control CCS5 example projects for redundant SMO and Encoder based FOC and InstaSPIN™-BLDC
- TI GUIComposer runtime environment with GUI applications demonstrating the MotorWare projects
- MotorWare Documentation
- Hardware Documentation
- HALCoGen GUI Chip and Driver configuration tool
- High End Timer Integrated Development Environment
- nowFlash
- nowECC
Other Names:
DRV8301LS12KIT, DRV8301 LS12 KIT
