Development Module FTDI VM800C35A-N
| Manufacturer | FTDI |
| Series | VM800C |
| Part Number | VM800C35A-N |
The VM800C35A-N is a development module for FTDI’s FT800, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE.
Prices
Detailed Description
This module behaves as an SPI slave, and requires a SPI Master for proper micro-controller interfacing and system integration.
The FT800 provides a powerful feature set in a small package to create dynamic HMI interfaces. The device supports line by line graphics rendering to 1/16 of a pixel on displays with resolution up to 512 × 512 with 262K colours. The chip includes a touch controller for sensing touch feedback from a TFT display with a resistive touch panel as well as a sound synthesizer and audio playback with a PWM output to drive a speaker.
VM800C Modules:
| Options | Development Modules | ||||
| VM800C35A-N | VM800C43A-N | VM800C35A-D | VM800C43A-D | VM800C50A-D | |
| Support Dysplays | 3.5'' TFT | 4.3'' TFT / 5.0'' TFT | 3.5'' TFT | 4.3'' TFT | 5.0'' TFT |
| Display Included | No | No | Yes | Yes | Yes |
FT800 Key Hardware Features
- Single chip for Display, Audio and Touch control
- Up to 512 x 512 pixel resolution
- 262K colours (6 Red, 6 Green, 6 Blue)
- Anti-Aliasing
- 2-bit colour dither
- Programmable HSYNC/VSYNC timing
- Backlight control
- Resistive touch sense
- Objective oriented programming approach
- Embedded widgets to assist with creating complex images
- Mono audio output
- 64 in-built polyphonic tones
- Decode for mono 8-bit linear PCM, 4-bit ADPCM and μ-Law coding format at sampling frequencies from 8kHz to 48kHz
- SPI/I2C interface to host MCU
- 1.8V to 3.3V IO levels to host MCU
- 3V3 levels on RGB pins
VM800C modules support 3 different LCD panel size options. Users can also connect to different LCD screens as long as they meet the FT800 technical specification and fit the VM800C LCD connector.
VM800C35A-N Features:
The VM800C utilises the FTDI FT800 Embedded Video Engine. Graphic, audio and touch features of the FT800 can be accessed with the VM800C. For a full list of the FT800’s features please see the FT800 datasheet.
The VM800C has the following features:
- Ready to use LCD module
- Part types with LCDs supporting resistive touch with pressure sensing.
- On board LCD backlight LED Driver
- Supports mono audio output
- On board audio power amplifier and micro speaker
- Flexible power supply. Powering the VM800C using either a 2.1mm power jack , SPI master connector or via USB Micro-B port
- 5 V tolerant buffers when used with a 5V SPI Master.
VM800C User Guide and Schematic
Other Names:
VM800C35AN, VM800C35A N
