In-System Programmer-Debugger Atmel Power Debugger (ATPOWERDEBUGGER)

Prices

Detailed Description

In addition the Atmel Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of a design.

Atmel Power Debugger also includes a CDC virtual COM port interface as well as Atmel Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source.

The Power Debugger is a CMSIS-DAP compatible debugger which works with Atmel Studio 7.0 or later, or other frontend software capable of connecting to a generic CMSIS-DAP unit.

The Power Debugger streams power measurements and application debug data to Atmel Data Vizualiser for real-time analysis.

Key Features

• Supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
• Two independent measurement channels measuring both voltage and current simultaneously — One high resolution channel that can measure 100nA to 100mA and one lower resolution channel that can measure 1mA to 1A.
• Adjustable power supply that can be used to power the target application — Voltage adjustable between 1.6V and 5.5V. Can deliver up to 100mA
• USB feed-through connection for easy measurement of current consumption of USB powered target board
• 1.62 to 5.5V target operation
• USB powered
• Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out
• CDC virtual COM port interface
• Atmel Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source

Power Debugger kit contents:

1. Main unit with plastic back-plate
2. 2xUSB cable
3. 10-lead squid cable
4. Flat cable (10-pin 50mil connector and 6-pin 100mil connector)
5. Adapter board (20-pin 100mil connector, 6-pin 50mil connector and 10-pin 100mil connector)
6. 20-pin 100mil jumper cable

Power Debugger User Manual