Evaluation Kit Atmel ATMEGA328P-XMINI

Prices

Detailed Description

The evaluation kit comes with a fully integrated debugger that provides seamless integration with Atmel Studio 6.2 or later. The kit provides access to the features of the ATmega328P enabling easy integration of the device in a custom design.

Key Features

• ATmega328P MCU Installed:
  • Advanced RISC Architecture
  • Up to 20 MIPS Throughput at 20 MHz
  • 32 KBytes of In-System Self-Programmable Flash program memory, 1 KBytes EEPROM, 2 KBytes Internal SRAM
  • Atmel QTouch library support
    • Capacitive touch buttons, sliders and wheels
    • QTouch and QMatrix acquisition
    • Up to 64 sense channels
  • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
  • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
  • Real Time Counter with Separate Oscillator
  • Six PWM Channels
  • 8-channel 10-bit ADC in TQFP and QFN/MLF package
  • Temperature Measurement
  • Programmable Serial USART
  • Master/Slave SPI Serial Interface
  • Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
  • Programmable Watchdog Timer with Separate On-chip Oscillator
  • On-chip Analog Comparator
  • 23 Programmable I/O Lines
• On-board debugger with full source-level debugging support in Atmel Studio.
• Auto-ID for board identification in Atmel Studio 6.2
• Access to all signals on target MCU
• One green status LED
• One mechanical user push button
• Four capacitive touch buttons (underneath the AVR logo)
• Virtual COM port (CDC)
• 16MHz target clk
• USB powered
• Arduino shield compatible foot prints
• Target SPI bus header foot print
• Xplained Pro extension headers can easily be strapped in
• Supported with application examples published on Atmel Spaces

ATMEGA328P-XMINI Schematic Diagram

Other Names:

ATMEGA328PXMINI, ATMEGA328P XMINI