Starter kit Keil MCB1760UME
The Keil MCB1760 Evaluation Board introduces the new NXP LPC1760 family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture.
Detailed Description
The MCB1760 has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. Starter kit also includes the ULINK-ME USB-JTAG adapter
MCB1760 Features
- 100MHz LPC1768 ARM Cortex-M3 processor-based MCU in 100-pin LQFP
- On-Chip Memory: 512KB Flash & 64KB RAM
- Color QVGA TFT LCD
- 10/100 Ethernet Port
- USB 2.0 Full Speed - USB, USB-OTG, & USB Host
- 2 CAN Interfaces
- 2 Serial Ports
- SD/MMC Card Interface
- 5-position Joystick and push-button
- Analog Voltage Control for ADC Input
- Amplifier and Speaker
- 70 GPIO pins
- Debug Interface Connectors
- 20 pin JTAG (0.1 inch connector)
- 10 pin Cortex debug (0.05 inch connector)
- 20 pin Cortex debug + ETM Trace (0.05 inch connector)
The Keil ULINK-ME USB-JTAG Adapter connects your PC's USB port to your target system (via JTAG or SWD) and allows you to program and debug embedded programs on the target hardware.
ULINK-ME Features:
- Plug-and-Play installation using standard Windows USB drivers
- Serial Wire Debug (SWD) support for ARM Cortex-M3 based devices
- Real-Time Trace for Cortex-M3 using Serial Wire Viewer (SWV)
- NXP 2-wire debug interface (P89LPC952 and P89LPC954) support
- Real-Time Agent with memory R/W during execution, terminal emulation, and serial debug output
- 20-pin 0.1 inch JTAG connector
ULINK-ME may be used for:
- On-chip Debugging (using on-chip JTAG, SWD or SWV)
- Flash Memory Programming (using user-configurable Flash programming algorithms).
Evaluation Software
The MCB1760 Evaluation Board and Starter Kit include the MDK-ARM Evaluation Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1760 are included.
The MCB1760UME kit includes:
- The MCB1700 Evaluation Board.
- A µVision IDE Quick Start Guide.
- An ARM Development Tools Overview.
- A CD-ROM that includes:
- An evaluation version of the Keil MDK-ARM Microntroller Development Kit.
- Example programs for the MCB1700 Evaluation Board.
- The MCB1700 Evaluation Board User's Manual (this manual).
- Example Programs for the MCB1700 Evaluation Board are located in the folder KEILARMBOARDSKEILMCB1700. All examples can be compiled and debugged using the Evaluation Version.
