Development module FTDI VDIP1
VDIP1 Module makes prototyping Vinculum designs a snap.
Detailed Description
The VDIP1 module is an MCU to USB Host Controller development module for the VNC1L device.
VDIP1 is supplied on a PCB designed to fit a 24-pin DIP socket and provides access to all UART, SPI and FIFO interface pins of the VNC1L device.
Ideal for rapid prototyping and development of VNC1L designs, an attractive quantity discount structure also makes this module suitable for incorporation into low/medium volume finished product designs.
Key VDIP1 features include :
- Jumper selectable UART, SPI or FIFO MCU Interfaces
- Uses FTDI's VNC1L device
- USB "A" type socket to interface with USB peripherals
- 2nd USB Interface available via module pins if required
- Single 5V supply input
- Auxiliary 3.3V/200mA power output to power external logic
- Power Good and Traffic Indicator LEDs
- Reset# and Prog# signals allow device programming via the UART interface if required.
