Development module FTDI VDIP2
The VDIP2 module is a compact development module for the VNC1L based on 2 USB connectors.
Detailed Description
The module is targeted for MCU to embedded USB Host / Slave controller interface development using the VNC1L IC device. The VDIP2 module features a 40 pin DIP socket interface providing access to the UART, parallel FIFO, and SPI interface pins on the VNC1L device. The VDIP2 is an ideal platform for prototyping and the development of VNC1L designs.
Attractive quantity discounts on the VDIP2 makes this module suitable for incorporation into low and medium volume finished product designs.
Ideal for rapid prototyping and development of VNC1L designs, an attractive quantity discount structure also makes this module suitable for incorporation into low/medium volume finished product designs.
Key VDIP2 features include :
- Two vertically mounted USB "A" type sockets to interface with USB peripheral devices
- Uses FTDI's VNC1L device
- Jumper selectable UART, parallel FIFO or SPI MCU interfaces
- Single 5V supply input
- Auxiliary 3.3V/200mA power output to external logic
- Power and traffic indicator LEDs
- Program or update firmware via USB Flash disk or or via UART interface
- VNC1L firmware programming control pins PROG# and RESET# brought out onto jumper interface
- VDIP2 is a Pb-free, RoHS complaint development module
- VDIP2 module is supplied pre-loaded with Vinculum VDAP firmware
