The bandpass filter circuit shown in Figure 1 features an electronically controlled Q. Q for a bandpass filter is defined as the ratio of the 3 dB pass bandwidth to the stop bandwidth at some specified attenuation. The center frequency of the ...
Linear Technology Corporation announces the LT8300 , a low quiescent current monolithic flyback regulator that significantly simplifies the design of an isolated DC/DC converter. No optocoupler, third winding or signal transformer are required for ...
Linear Technology Corporation introduces the LT4275 , LTPoE++™, PoE+ and PoE-compliant powered device (PD) interface controllers for applications requiring up to 90W of delivered power. PoE+ limits the maximum PD power delivery to 25.5W, ...
Design Note 521 Introduction A DC/DC converter’s efficiency and component temperature are important considerations in high power applications where high current could overheat the catch diode used in an asynchronous buck or boost topology. ...
Linear Technology Corporation announces the LT3081 , a rugged 1.5A wide input voltage range linear regulator with key usability, monitoring and protection features. The device has an extended safe operating area (SOA) compared to existing ...
Linear Technology Design Note 504 Introduction The LT8610 and LT8611 from Linear Technology are 42 V, 2.5 A synchronous step-down regulators that meet the stringent high input voltage and low output voltage requirements of automotive, industrial, ...
85V to 265V Input, 0.97 PF, High Efficiency LED Constant Current Controller, for Up to 30W Compact Solid State LED Illumination Applications Integrated Silicon Solution , Inc. announced the IS31LT3932 , a high performance universal AC input LED ...
Linear Technology Corporation announces the LT3063 , a high voltage, low noise, low dropout voltage linear regulator with active output discharge. The IC delivers up to 200 mA of continuous output current with a 300 mV dropout voltage at full load. ...
The LT3669 is an IO-Link PHY compatible (COM1/COM2/COM3) industrial transceiver that includes a high efficiency step-down regulator and a low dropout linear regulator. The device offers cable interface protection to 60 V. Wake-up detect ...
Introduction A common problem in power distribution systems is loss of regulation due to the cable/wire voltage drop between the regulator and the load. Any increase in wire resistance, cable length or load current increases the voltage drop over ...