Datasheet Texas Instruments LM324MX
| Manufacturer | Texas Instruments |
| Series | LM324-N |
| Part Number | LM324MX |
Low Power Quad Operational Amplifier 14-SOIC 0 to 70
Datasheets
LMx24-N, LM2902-N Low-Power, Quad-Operational Amplifiers datasheet
PDF, 1.9 Mb, Revision: D, File published: Jan 26, 2015
Extract from the document
Prices
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 14 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | LM324M |
| Width (mm) | 3.91 |
| Length (mm) | 8.65 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Download |
Replacements
| Replacement | LM324MX/NOPB |
| Replacement Code | S |
Parametrics
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 65 dB |
| CMRR(Typ) | 85 dB |
| GBW(Typ) | 1 MHz |
| IIB(Max) | 100000 pA |
| Iq per channel(Max) | 0.3 mA |
| Iq per channel(Typ) | 0.18 mA |
| Number of Channels | 4 |
| Offset Drift(Typ) | 7 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 20 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 14SOIC: 52 mm2: 6 x 8.65(SOIC) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 0.5 V/us |
| Total Supply Voltage(Max) | 32 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 40 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 7 mV |
Eco Plan
| RoHS | See ti.com |
Application Notes
- Mounting of Surface Mount Components (Rev. B)PDF, 5.8 Mb, Revision: B, File published: Apr 23, 2013
Over the past few years, electronic products, and especially those which fall within the category ofConsumer Electronics, have been significantly reduced in physical size and weight. This documentprovides information about the techniques used to mount CSP size components. - AN-666 DTMF Generation with 3.58 MHz CrystalPDF, 798 Kb, File published: May 14, 2004
- AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)PDF, 371 Kb, Revision: B, File published: Apr 23, 2013
Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate yet economical F/V converters sui - Get More Power Out of Dual or Quad Op-AmpsPDF, 91 Kb, File published: Oct 2, 2002
- AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, File published: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, File published: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
Model Line
Series: LM324-N (13)
Manufacturer's Classification
- Semiconductors > Space & High Reliability > Amplifier > Operational Amplifiers
