Development system mikroElektronika LV 24-33 v6

Detailed Description

3 in 1 Development System - Development System + On-Board USB 2.0 programmer + On-Board mikroICD (In-Circuit Debugger): mikroICD is a highly effective tool for Real-Time debugging at hardware level.

It enables you to execute mikroC PRO, mikroPascal PRO and mikroBasic PRO programs on a host PIC24 or dsPIC33 microcontroller and monitor variable values, Special Function Registers (SFR), RAM and EEPROM memory modules while the program is running. There is also ultra fast USB 2.0 programmer for MCU programming that now supports more PIC24 and dsPIC33 microcontrollers.

LV 24-33 v6 allows PIC24 and dsPIC33 microcontrollers to be interfaced with a wide range of peripheral devices. On-board, high-speed CAN Transceiver MCP2551. On-board Touch Screen controller with a Touch Panel connector.

The LV 24-33 v6 development system supports a wide range of microcontrollers including PIC24 and dsPIC33 microcontrollers. Newly released PIC24 and dsPIC33 microcontrollers will be supported by a new version of LvPICFlash software that is updated regularly.

Features:

• Double RS-232 communication with PC or an MCU is performed via DB9 connector.
• System can be easily configured via DIP switches. Each DIP switch configures one part of the system.
• MMCSD card slot enables you to easily use MMC/SD cards in your work.
• System supports 64-, 80- and 100-pin dsPIC33 and PIC24 MCUs. It comes with a PIC24FJ64GA010.
• 2 potentiometers are used for testing multiple A/D conversion. Inputs can be configured via jumpers.
• USB or external power supply source is selected by moving jumper. Power supply switch turns the system on/off.
• 3.3 MCU Power Supply is placed near the MCU and enables it to operate stablely.
• All pins are connected to IDC10 connectors for further expansion.
• 96 LEDs are used for displaying states of all pins on the microcontroller at the same time.
• On-board jumpers are used for pull-up/pull-down configuration. These jumpers are available for all pins.
• 96 push buttons are connented to all microcontrollers pins.
• ICD2 connector for In-circuit debugger. There are also jumpers for microcontroller pin selection.
• LCD can be easily connected via the on-board connector that is also connected to MCU pins.
• Very fast, on-baord USB 2.0 programmer with mikroICD. There is no need to connect external programmer.
• Voltage level to be applied when a button is pressed (GND or +3.3V) is selected via the on-board jumper.
• Touch Screen can be connected to the on-board controller via Touch screen connector.
• Graphic LCD 128x64 can be easily connected via the on-board connector.
• Reset circuit is used to reset the microcontroller. It is connected to the MCLR pin of the microcontroller.
• LCD Contrast Potentiometer is used for adjusting LCD contrast.
• Two JTAG ports are used to support in-circuit debugger and firmware programming.
• MCP2551 CAN Transceiver is used for communication with other microcontrollers.
• USB connector with LED indication for microcontrollers with USB facilities.
• 64-Kbit Serial SRAM 23K640 uses SPI communication interface.
• GLCD Contrast Potentiometer is used for adjusting Graphic LCD contrast.

Examples provided with this development system will show you how to connect PIC24 and dsPIC33 microcontrollers easily with other peripheral components or devices in order to easily develope your prototype device. Each example contains a detailed description of the relevant program including comments.

Package

1. LV 24-33 v6 development system.
2. MCU card with PIC24FJ64GA010-PF.
3. USB cable.
4. CD with software, drivers and examples in C, BASIC and Pascal.
5. Printed documentation that includes: LV 24-33 v6 Manual, LV 24-33 v6 Schematic, mikroICD Manual and Quick Guide for Installing USB Drivers.

Schematic diagram LV24-33 v6 development board

mikroe.com

Other Names:

LV2433 v6, LV24 33 v6