Universal development system mikroElektronika UNI-DS3

Detailed Description

• High-Performance On-board USB 2.0 Programmer

Very fast USB 2.0 programmer with a simplified driver installation is available on MCU cards.

• MMC/SD Storage

MMC/SD cards enable you to add mass storage support to your prototype device.

• Just switch the card in order to continue working in the same development environment with a different microcontroller.
• Serial Ethernet

On-board Serial Ethernet Module ENC28J60 that uses SPI communication.

• Real-Time Clock (RTC)

Real-Time Clock (RTC) with battery supply is used for time measurement.

Features:

• RS-232 communication with a PC or any other device is performed via DB9 connector.
• IDC10 Connectors
  • All the pins are taken out on IDC10 connectors to make them available for further connections.
• USB Programmer Connector
  • USB 2.0 programmer can be connected to a PC via the on-board USB programmer connector.
• Voltage Level Selection
  • Voltage level to be applied when a button is pressed is selected via the on-board jumper.
• Pull-up/pull-down port configuration
  • On-board jumpers are used for pull-up/pull-down port configuration.

    These jumpers are available for all pins.

• LCD
  • LCD can be easily connected via the on-board connector that is also connected to MCU pins.
• Light Emitting Diodes
  • 72 LEDs (Light Emitting Diodes) are used to indicate the logic state of all microcontroller pins.
• Voltage Reference
  • Voltage Reference for A/D or D/A converter can be either VCC or 4.096 V.
• Push Buttons
  • 72 push buttons are connected to all microcontrollers pins.
• Real-Time Clock (RTC)
  • Real-Time Clock (RTC) PFC8583 with battery supply is used to keep track of the current time even when the MCU is off.
• 12-bit output DAC
  • 12-bit output DAC MCP4921 with serial interface is used for applications in measuring and regulating devices.
• DIP Switch
  • System can be easily configured by means of DIP switches. Each DIP switch configures one part of system.
• Graphic LCD 128x64
  • Graphic LCD 128x64 can be easily connected via the on-board connector that is also connected to MCU pins.
• 12-bit AD converter
  • Serial 12-bit voltage A/D converter for applications in measuring and regulating devices.
• External power supply
  • External power supply can be DC or AC. On-board jumper is used for selecting external power supply.
• On-board ENC28J60 Ethernet Controller
  • ENC28J60 is a 28-pin, 10BASE-T stand-alone Ethernet Controller with SPI interface.
• RS485 Communication Module
  • RS485 communication is available on-board for connecting more devices to 485 network.
• CAN module
  • CAN module is used for communication with other microcontrollers.

mikroe.com

Other Names:

MEUNIDS3, UNIDS3, ME UNI DS3, UNI DS3, ME-UNI-DS3 UNI-DS3, ME-UNI-DS3 UNI-DS3